Making Copies; Specifying Copy Settings; Number Of Copies; Selecting The Paper - Fuji Xerox DocuPint C2090 FS User Manual

6.2 Making copies

To make copies of your document, do the following:
1. Make sure the DocuPrint C2090 FS is in Copy mode.
2. Use the number keys to enter the number of copies you want to make.
3. Press the <Start> button to start copying.
4. When copying job is done, get your copies from the output tray.

6.3 Specifying copy settings

6.3.1

Number of copies

You can specify the number of copies by pressing the number keys on the control panel. The default value
is set to 1.
To specify the number of copies, do the following:
1. Make sure the DocuPrint C2090 FS is in Copy mode. If not, press the <Copy> button on the control
panel.
2. Make sure the [Copies] value is highlighted in the LCD panel. Enter the number of copies you want
to make using the number keypad. You also can press the <◄/►> buttons to setting copies number.
6.3.2

Selecting the paper

You can choose the paper size to use for your copies.
To specify the paper size, do the following:
1. Make sure the DocuPrint C2090 FS is in Copy mode.
2. Press the <Copy> then press <Size/Type> option.
3. LCD shown [Original size – A4 ] using the <◄/►> buttons to choose paper type.
4. Press <Set> to confirm your setting.
5. Press the <▲> button to return to [READY] mode.
Note:
• For usable paper sizes, see "Usable paper" section

6.4 Image quality

You can adjust the image quality such as the brightness, sharpness, and color balance of your copy by
choosing from levels 1 to 5. The higher level indicates the darker the image. The default value is set to 3.
To specify the copy brightness, do the following:
1.
Make sure the DocuPrint C2090 FS is in Copy mode. If not, press the <Copy> button on the control
panel.
2.
Press the <Image Quality> button
3.
Use the <◄/►> buttons to choose [Brightness] and press <Set>.
4.
Use the <◄/►> buttons to adjust the brightness of your copy.
All manuals and user guides at all-guides.com
- 60 -