Htu Exit Roller Removal; Htu Front Redrive Cover Removal - Lexmark C792e 5062-210 Service Manual

HTU exit roller removal

1.
Remove the upper exit shaft. See
2.
Unsnap the left side of the roller from the cover and remove the roller.

HTU front redrive cover removal

1.
Remove all output options from the printer.
2.
Lay the HTU on its back, and open the access door.
3.
Remove four screws (A), and remove the cover.
"HTU upper exit shaft removal" on page
5062
4-314.
4-279
Repair information