Checking The Image Before Printing - Sharp MX-M503N Operation Manual

CHECKING THE IMAGE BEFORE PRINTING

When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received
image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
* The factory default setting is disabled.
Depending on the size of the received data, part of the image in the image check screen on the touch panel may not appear.
The memory has received data.
Check the data?
1
Received Data List
Thumbnail
0123456789
BBB BBB
9876543210
0612345678 BBB BBB
2
0123456789 BBB BBB
CCC CCC
Image Check
(2)
When the [Select All] key is touched, it will change into the [Cancel All] key. When all received data has been selected
using the [Select All] key, the selection can be cancelled by touching the [Cancel All] key.
Image Check
0123456789
3
If the screen of step 1 appears when you are configuring settings in the setting screens of any of the modes, the configured
settings will be cancelled if you view the image. After viewing the image, you will return to the base screen of image send
mode, regardless of which mode you were in previously.
System Settings (Administrator): Received Data Image Check Setting
Use this to specify whether or not a received fax can be viewed before it is printed.
Downloaded From ManualsPrinter.com Manuals
No Yes
(1)
Select All
04/04/2010 10:28
Not checked
Checked
04/04/2010 10:14
04/04/2010 10:12 Not checked
04/04/2010 10:08
Checked
04/04/2010 10:00 Not checked
04/04/2010 10:00 Checked
Delete Print
04/04/2010 10:28
Display Rotation
0001 /0010
When an image is received, a confirmation
prompt will appear. Touch the [Yes] key.
If this message appears while you are configuring settings of any type
and you touch the [Yes] key, the settings that you are configuring will
be cancelled. If this message appears in another mode, you will return
to the base screen of image send mode after checking the image.
Select the received image
(1) Touch the key of the received image that
Back
you want to check.
Multiple received images can be checked.
1
(2) Touch the [Image Check] key.
5
• To show thumbnails of the received images, touch the
[Thumbnail] key.
• To delete an image that has been selected, touch the
[Delete] key. To print an image that has been selected,
touch the [Print] key.
Check the received image and then
Back
touch the [Print] key.
1 / 3
Printing begins.
For information on the image check screen, see
CHECK SCREEN" (page 4-64).
Print
4-63
FACSIMILE
"IMAGE
Contents