Shift Lever Installation - Honda 2002 Accord Manual

Hide thumbs Also See for 2002 Accord:

Table of Contents

Automatic Transmission

Shift Lever installation

1. Install the shift lever assembly.

2. Turn the ignition switch ON (II), and verify that the

IE position indicator comes on.

3. If necessary, push the shift cable until it stops, then

release your hand. Pull the shift cable back one

step so that the shift position is in EL

4. Turn the ignition switch OFF.

5. Insert a 6.0 mm (0.24 in.) pin (A) into the

positioning hole ( B ) on the shift lever bracket base

through the positioning hole on the shift lever

6. Rotate the socket holder (A) on the shift cable (B)

counterclockwise a quarter turn, then slide the

holder onto the shift lever bracket base (C).

Install the shift cable end (D) over the mounting

stud (E) by aligning its square hole (F) with the

square shape (G) at the bottom of the stud. Rotate

the holder clockwise a quarter turn to secure the

shift cable.

NOTE: Do not install the shift cable by twisting the

shift cable guide (H).

Troubleshooting