Heating
Heater Control Panel Removal and
Installation
1. Remove t h e center panel together w i t h the heater
control panel (see page 20-86).
2. Remove the self-tapping screws and the heater
control panel (A) f r o m the center panel (B).
A
Heater Control Panel Disassembly
and Reassembly
1. Remove the fan switch (A) and temperature control
dial (B), then remove the front panel (C). Remove
the mode control switch <D), recirculation control
switch (E), rear defogger switch (F) and A/C switch
lid (G) (or A/C switch (H» buttons.
2. Reassemble the control panel in the reverse order
of removal.
3. Install the control panel in the reverse order of
removal. After installation, operate the control
panel controls to see w h e t h e r it works properly.
4. Run the self-diagnosis function to c o n f i r m that
there are no problems in the system (see page 21-
4).
21-24