Injector Replacement
1. Relieve fuel pressure (see page 11-115).
2. Disconnect the connectors f r o m the injectors (A), the EGR valve (B), and the EVAP canister purge valve (C).
A
3. Disconnect the v a c u u m hoses and fuel return hose f r o m the fuel pressure regulator (D) and EVAP canister purge
valve. Place a rag or shop t o w e l over the hoses before disconnecting t h e m .
4. Disconnect the fuel hose (E) f r o m the fuel rail (F).
5 . Remove the retainer nuts (G) f r o m the fuel rail and harness holder (H).
6. Remove the EVAP canister purge valve, and disconnect the PCV valve (I).
7. Disconnect the fuel rail.
8. Remove the injectors f r o m the fuel rail.
(cont'd)
11-97