IB Position
Shift solenoid valve C is turned OFF by the PCM, and SH C pressure ( S O is applied to the right side of the reverse CPC
valve. Then the reverse CPC valve is moved to the left side to uncover the port leading line pressure (3) to the servo
valve. Line pressure (3') passes through the servo valve and flows to the manual valve. Line pressure (3') is
intercepted at the manual valve, and is not applied t o the clutches.
NOTE:
• W h e n used, " l e f t " or " r i g h t " indicates direction on the hydraulic circuit.
• Hydraulic circuit s h o w s the '98-99 models; the '00-02 models are similar.
1ST ACCUMULATOR
2ND ACCUMULATOR
3RD ACCUMULATOR
ACCUMULATOR
A/T CLUTCH PRESSURC
CONTROL SOLCNCMD
VALVE!
(cont'd)
14-57