Timing Belt And Balancer Belt Removal - Honda 2002 Accord Manual

Timing Belt and Balancer Belt Removal
Special Tools Required
• Holder Handle 07JAB-001020A
• Holder Attachment, 50 mm, Offset 07MAB-PY3010A
• Socket, 19 mm 07JAA-001020A
or a commercially available 19 mm socket
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buttons.
2. Disconnect the battery negative terminal first, then
the positive terminal.
3. Turn the crankshaft pulley so its TDC mark (A) lines
up with the pointer (B).
B
A
4. Remove the front tires/wheels.
5. Remove the splash shield.
6. Loosen the mounting bolts (A), then remove the
P/S belt (B).
A
A
7. Disconnect the alternator wire harness.
-1 Pull up the lock (A), then release the wire
harness tie (B).
- 2 Pull back the boot and remove the 6 mm nut
(C).
- 3 Disconnect the connector (D) from the
alternator.
D
8. Remove the alternator (see page 4-32).
9. Remove the alternator bracket (see page 5-10).
(cont'd)
6-23