Front Bezel - Installation / Removal; Bezel Snap-Ons; Figure 66. Installing The Snap-On To The Front Bezel; Figure 67. Removing The Snap-On From The Front Bezel - Intel R1000WT Series System Installation And Service

Intel ® Server System R1000WT Product Family System Integration and Service Guide
3.9 Front Bezel – Installation / Removal
The system supports the installation of an optional front bezel (Intel product code A1UBEZEL). The Bezel kit includes a
plastic lockable front bezel and multiple bezel Snap-ons allowing for OEM differentiation.
3.9.1

Bezel Snap-ons

The bezel kit provides three different bezel Snap-ons to allow for OEM differentiation; two different size badging Snap-
ons, and one decorative wave Snap-on.

Figure 66. Installing the Snap-on to the front bezel

To mount the Snap-on to the bezel, insert the Snap-on hooks into the bezel and press to snap it into place.

Figure 67. Removing the Snap-on from the front bezel

To remove the Snap-on from the bezel, squeeze the hooks at the rear of the Snap-on to release it (see letter "A"). Then
remove the Snap-on from the bezel (see letter "B").
44 Rev 2.2