Intel
®
Server System R1000WT Product Family System Integration and Service Guide
3.11 Dual Intel
Installation/Removal
The 1U chassis has support for an optional dual RMFBU mounting assembly. (Intel Accessory Kit product code
AWTAUXBBUBKT). The kit includes RMFBU mounting options for both a 1U and 2U server system. For the 1U chassis,
only the plastic dual RMFBU housing and small mounting plate are used from the kit.
3.11.1 Dual Intel
Installation
•
Remove the two fastener screws from the pre-installed RMFBU mounting plate mounted in the chassis
(see 'A'). Save the screws for later installation
•
Remove the pre-installed RMFBU mounting plate from the chassis
•
Locate the new RMFBU mounting plate from Intel accessory kit AWTAUXBBUBKT
•
Place the new RMFBU mounting plate into the chassis making sure all mounting holes are in alignment
•
Using the two fastener screws from Step 1, secure the mounting plate to the chassis (see 'B')
48
®
RAID Maintenance Free Backup Units (RMFBU)
®
RAID Maintenance Free Backup Unit (RMFBU) Assembly
Figure 72. Standard RMFBU Mounting Plate Removal
Figure 73. AWTAUXBBUBKT 1U RMFBU Mounting Plate Installation
Rev 2.2