Table of Contents
Advertisement
Intel
®
Server System R1000WT Product Family System Integration and Service Guide
•
Locate the backplane I
•
Attach the 1x5 pin connector (labeled "HSBP") of the I
"HSBP I
2
C") on the backplane.
•
Route the backplane I
1x3 pin connector (silk screened "HSBP I
Connect Front Control Panel, Front USB Port, and Front Video Port Cables
10
2
C cable.
Figure 14. Hot Swap Backplane I
Figure 15. Backplane I2C Connector Location
2
C cable next to the nearest chassis sidewall and connect the other end of the I
2
C") on the server board
Figure 16. Hot Swap Backplane I
2
C Cable
2
C cable to the matching 1x5 pin connector (silk screened
OR
2
C Internal Cable Connection
2
C cable to the
Rev 2.2
Advertisement
Table of Contents
