Selecting A Stored Zoom Ratio; Storing The Desired Zoom Ratio - Konica Minolta bizhub c650 User Manual

Basic copy operations
4
Touch [Y] under "Set Individual Zoom", and then use the keypad to type in the desired zoom ratio
(between 25.0% and 400.0%) for the Y direction.
– To cancel changes to the settings, touch [Cancel].
5
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.

Selecting a stored zoom ratio

Copy zoom ratios that have been stored can be recalled to be used when desired.
In addition, stored copy zoom ratios can be changed.
0 As the factory default, "Full Size" is selected.
0 Touch [+] to enlarge the zoom ratio, and touch [-] to reduce the zoom ratio in 0.1% increments.
0 Stored zoom ratios can be changed to desired zoom ratios. For details on storing zoom ratios, refer to
"Storing the desired zoom ratio" on page 2-41.
1
In the Basic screen, touch [Zoom].
The Zoom screen appears.
C650
2
2-40