Control Panel Error Messages; Messages About Supplies - Fuji Xerox DocuPrint C3290 FS User Manual

Control Panel Error Messages

This section describes the messages displayed on the control panel.

Messages About Supplies

Message
Fuser Error
Error 010-351
Fuser CRUM Error
Reseat Fuser
Insert Fuser
Restart Printer
Remove Tape
XXX Cartridge
Insert XXXX
Print Cartridge
Error 093-NNN
Insert
Transfer Unit
CRUM Error
Error 094-330
Reseat Transfer Unit
Insert
Transfer Unit
X(xx) - CRUM Error
Error 093-9NN
Restart Printer.
Ready
Replace XXXX
Print Cartridge Soon.
Ready
Replace Fuser Soon
Ready
Replace Transfer Unit
Soon
Condition/Reason/Action
Time to replace the fuser.
Replace the old fuser with a new one.
The fuser is not installed correctly or is not working correctly due to damage
or malfunction.
Reinstall the fuser.
The fuser is not installed.
Install the fuser.
Sealing tape is still attached to the XXX print cartridge.
Remove the sealing tape from the displayed print cartridge.
The XXX print cartridge is not installed correctly or is not working correctly
due to damage or malfunction.
Reinstall the print cartridge.
See Checking or Managing the Printer with CentreWare IS
The transfer unit is not installed correctly or is not working correctly due to
damage or malfunction.
Reinstall the transfer unit.
The transfer unit need to be replaced.
The transfer unit is not installed.
Install the transfer unit.
The print cartridge needs to be replaced.
Replace the indicated print cartridge, either Yellow, Magenta, Cyan, or
Black.
The XXX print cartridge is nearly empty.
Purchase a new print cartridge.
See Checking or Managing the Printer with CentreWare IS
It is nearly time to replace the fuser.
Purchase a new fuser.
It is nearly time to replace the transfer unit.
Purchase a new transfer unit.
10-30

Control Panel Error Messages

on page 11-5.
on page 11-5.