Loading A Geometry File - Barco Reality SIM 6 Ultra II Owner's Manual

5.5.6

Loading a Geometry file

How to start up?
To start up the Load File menu, handle as follow :
1. Push the cursor key ↑ or ↓ to highlight Load.
GEOMETRY FILES
LOAD
GUIDED EDIT
FREE EDIT
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-52
2. Press ENTER to select.
The Load File menu will be displayed.
LOAD FILE
PREVIEW [OFF]
Filename
t_fishey.t06
t_globe.g02
t_keystn.g03
t_nodist.g01
t_sphear.g04
-------------------------------
Active file : t_nodist.g01
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 5-53
How to change the Preview setting ?
1. Push the cursor key → to highlight Preview.
2. Press ENTER to toggle the Preview mode [OFF] [ON].
OFF When highlighting a geometry file from the list, the geometry adjustments will be applied only when selecting a
file by pressing the ENTER key.
ON The geometry adjustments are already applied when highlighting a file from the list, this will require some
processing time from the projector when scrolling through the list of available files.
How to Load a file ?
1. When starting a new set up ?
If yes, Push the ↓ key to highlight the "t_nodist.g01" filestep 2
LOAD FILE
PREVIEW [OFF]
Filename
t_fishey.t06
t_globe.g02
t_keystn.g03
t_nodist.g01
t_sphear.g04
-------------------------------
Active file : t_nodist.g01
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 5-54
If no, When editing an existing set up push the ↑ or ↓ to highlight the corresponding user file .
2. Press ENTER to select.
The selected geometry file will become the active file and the Geometry files menu will be displayed again.
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
5. Random Access
67