Input Source Connections; Input Facilities; Input Selection Mode - Barco Reality SIM 6 Ultra II Owner's Manual

3. Connections
Recommended source specifications:
• The Active number of pixels has to be 1024 x 768 (XGA), 1280 x 1024 (SXGA) or 1600 x 1200 (UXGA).

3.6 Input source connections

3.6.1

Input facilities

Overview Input Facilities
3
VIDEO
R G
Image 3-4
Input Facilities
Input number
1
2
3
4
3.6.2

Input Selection Mode

What can be done with the Input Selection Mode ?
This Input Selection Mode can be set [AUTOMATIC] or [MANUAL].
When [AUTOMATIC] is selected in the Input slots menu, by starting up the projector, it searches for an input source by scanning the
inputs. If only one source is found, this source will be projected. If different sources are found, the priority is as follow.
1. 5 Cable input.
2. Computer.
3. Video (Optional).
4. Super Video (Optional).
When a RCVDS is connected to the projector, the [AUTOMATIC] mode is disabled.
How to set the Input selection mode
1. Press ADJUST or ENTER to start up the Adjustment Mode.
1. Only available when the optional video decoder is installed
20
4
3 4
S-VIDEO SDI 5 IEEE 1394
SDO
1
COMPUTER
B H/C V
1 2
Type of input
5–Cable Input
Computer Input
1
Video Input
Super Video Input 1
6 10/100 Base-T RS232 IN
MOUSE
2
MONITOR A
AUDIO IN AUDIO IN
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
RC
RS232 OUT COMM. PORT
B C
AUDIO IN AUDIO IN