Start Up; How To Start Up The Edit Menu; Changing The Settings - Barco Reality SIM 6 Ultra II Owner's Manual

5.3.5.1 Start up

How to start up the Edit menu ?

To start up the EDIT menu :
1. Push the cursor key ↑ or ↓ to highlight Edit.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-8
2. Press ENTER to select.
The Edit file adaptation menu will be displayed.
EDIT FILE
Filename Scr resolution
xga_60.s01 1 1024x768
xga_60.c01 1 1024x760
xga_60.c02 1 1024x760
xga_60.c03 1 1024x760
----------------------------
Active file : xga_60.c04
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 5-9
3. Select the file which must be edited (mostly the active file).
4. Press ENTER
The file name will be displayed in the upper right corner.
EDIT FILE xga_60.c02
HORIZONTAL
TOTAL 1344 PIXELS
ACTIVE 1024 PIXELS
START 266 PIXELS
PERIOD 16.625 µs
VERTICAL (FIELD)
TOTAL 800 LINES
ACTIVE 760 LINES
START 37 LINES
AMDS INTL [OFF]
STILL [OFF]
READ AMDS
OPTIONS
↑ , ↓ , ← , → <ENTER>, <EXIT>
Menu 5-10

5.3.5.2 Changing the settings

Different methods
The 3 different methods to change a setting will be described hereafter. These methods are:
• with the numeric keys on the remote control.
• with the arrow keys selecting the changing digit.
• with the arrow keys counting up or down.
How to change a setting with the numeric keys?
1. Push the cursor key ↑ or ↓ to highlight an item.
The color of the selected item will change.
2. Press ENTER to activate the digits.
3. Enter directly with the numeric keys on the RCU or local keypad the new value.
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
5. Random Access
45