7. Service Mode
7.19 Preset Input Balance
C
AUTION
Start up
1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance.
SERVICE
UNIFORMITY
ELECTRONIC CONVERGENCE
DYNACOLOR
GRAY LEVEL DEFINITION
PURITY
DISPLAY BLANKING
PANEL ADJUSTMENT
PRESET INPUT BALANCE
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-65
2. Press ENTER to select.
The following warning will be displayed :
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 7-66
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the Preset input balance
adjustments.
208
:
Changing these settings may seriously affect the performance of the projector.
R5976707 REALITY SIM 6 ULTRA II 01/02/2005