Barco Reality SIM 6 Ultra II Owner's Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. BarcoReality SIM 6 Ultra II
  6. Owner's manual
Barco Reality SIM 6 Ultra II Owner's Manual

Barco Reality SIM 6 Ultra II Owner's Manual

Hide thumbs Also See for Reality SIM 6 Ultra II:
Table of Contents

Advertisement

Quick Links

Download this manual
Reality SIM 6 Ultra II
Owner's Manual
R9040152
R5976707/01
01/02/2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Reality SIM 6 Ultra II and is the answer not in the manual?

Questions and answers

Related Manuals for Barco Reality SIM 6 Ultra II

Summary of Contents for Barco Reality SIM 6 Ultra II

  • Page 1 Reality SIM 6 Ultra II Owner’s Manual R9040152 R5976707/01 01/02/2005...
  • Page 2 Barco nv Simulation Products 600 Bellbrook Ave, Xenia OH 45385 Phone: +1 (937) 372 7579 Fax: +1 (937) 372 8645 E-mail: eis@barco.com Visit us at the web: www.eis.barco.com Barco nv Simulation Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.84.86 E-mail: info@barco.com...
  • Page 3 Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.

  • Page 5: Table Of Contents

    Gamma ........................56 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 6 5.5.7.10.4 Soft Edge Active On ................... . .140 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 7 7.18 Panel Adjustments ........................207 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 8 Index........................215 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 9: Packaging And Dimensions

    Save the original shipping carton and packing material, they will be necessary if you ever have to transport the lens. AUTION Never transport the projector with the lens mounted on it ! Always remove the lens before transporting the projector. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 10: Dimensions

    Dimensions are given in mm (1 inch = 25.4 mm) 371.2 202.4 53.5 53.5 29.6 187.2 152.6 152.6 Image 1-2 Front view dimensions projector 82.7 211.4 169.5 139.6 148.9 380.6 526.8 Image 1-3 Side view dimensions projector R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 11 1. Packaging and Dimensions Image 1-4 Top view dimensions projector R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 12 1. Packaging and Dimensions R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 13: Installation Guidelines

    (these deposit a thin layer of greasy residue upon the projectors internal optics and imaging electronic surfaces, degrading performance), then it is highly advisable and desirable to have this contamination removed prior to it reaching the projectors clean R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 14: Configuration

    Which configuration can be used ? The projector can be installed to project images in four different configurations : • Front/table • Rear/table • Front/ceiling • Rear/ceiling Positioning the projector Drawings are given for a nominal lens position. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 15: Lenses

    SW Screen width SH Screen height (image height) PD Projector distance, distance between screen and projector 2.4 Lenses Overview • Lenses • Lens formulas Lens installation on the SIM6 projector • • Cleaning the lens R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 16: Lenses

    2. Installation Guidelines 2.4.1 Lenses Available lenses The following lenses are available, or will become available (contact a BARCO service center) as an option : Lenses Standard version Scheimpflug version QFD(1.27:1) R9840400 R9840600 QFD(2.5:1) R9840290 R9840470 QFD(1.4-2.1:1) R9840380 R9840610 QFD(2.1-3.0:1)

  • Page 17: Lens Installation On The Sim6 Projector

    3. Put the lens on the lens holder. Image 2-4 4. Push the lens locks back in position and lock the levers. 5. Plug the wires of the motor unit into the connector R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 18: Cleaning The Lens

    Two batteries are packed together with the RCU. Before using your RCU, install first these batteries. 1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 19 2. Installation Guidelines 2. Lift up the top side of the cover at the same time. 3. Insert the batteries as indicated in the RCU. 4. Put the battery cover on its place. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 20 2. Installation Guidelines R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 21: Connections

    When ’1’ is visible, the projector is switched on The projector starts in standby mode. The projector mode indication lamp is red. Starting image projection. 1. Press Stand by key once on the local keypad or on the remote control. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 22 Press the EXIT button on the RCU or keypad to remove this warning message. If the projector is running all the time the lamp warning will never be displayed. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 23: Switching To Standby

    The total lifetime of the lamp for a safe operation is “x” hours max, do not use it longer. Always replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement. Press ENTER to reset the lamp runtime.

  • Page 24: Input Source Connections

    When a RCVDS is connected to the projector, the [AUTOMATIC] mode is disabled. How to set the Input selection mode 1. Press ADJUST or ENTER to start up the Adjustment Mode. 1. Only available when the optional video decoder is installed R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 25 - 2. RGB [HS&VS] - 3. NO MODULE - 4. NO MODULE - 5. NO MODULE - 6. NO MODULE Select with ↑ or ↓ <ENTER> to toggle <EXIT> to return Menu 3-6 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 26: Inputs Via Rcvds05

    / Input Signal RGBHV RGBS RGsB Composite Video Video Super Video How to connect to Input 1? 1. Connect the Output of the Image Generator to the 5–Cable BNC Input (Input 1) on the projector. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 27 ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 3-9 3. Press ENTER to select. The Installation will be displayed. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 28: Input 2

    1. Connect the output of the graphical card of the computer to the Computer input of the projector Note: Only if the connection is < 60 cm. Otherwise insert an interface between the output of the computer and the input of the projector. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 29: Input 3 (Optional)

    How to select Input 2? 1. Press key 2 on the RCU or local keypad. 3.6.6 Input 3 (Optional) This (Composite) Video Input is only available when the Optional Video Decoder is installed. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 30: Input 4 (Optional)

    This (Composite) Video Input is only available when the Optional Video Decoder is installed. What can be connected? Separate Y-Luma/C-Chroma signals for higher quality playback of Super VHS-signals. Loop through is not available. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 31: Communications Connections

    : sending data to the projector or copying the data from the projector to a hard memory device (hard disc, floppy, etc.). How to connect ? 1. Connect the serial communication port of computer or Apple Macintosh to the RS232 in port of the projector. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 32 3. Connections R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 33: Getting Started

    "pause" (blanked picture, full power for immediate restarting) • direct access to all connected sources. 4.2 Terminology overview Overview The following table gives an overview of the different functionalities of the keys. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 34 Phase be sure the projector is warmed up for at least 15 min before adjusting the phase, press to adjust the phase of the projected image. FREEZ press to freeze the projected image. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 35: Operating The Projector

    When ’1’ is visible, the projector is switched on The projector starts in standby mode. The projector indication lamp is red. Starting image projection. 1. Press Stand by key once on the local keypad or on the remote control. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 36: Quick Setup Adjustments

    • Quick on Screen Color Change. 4.4.1 Quick lens Adjustment What can be done ? For a quick lens adjustment press the * key on the RCU to display immediately the lens menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 37: Quick On Screen Color Change

    2. Push the cursor key ↑ or ↓ to highlight Installation. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 4-2 3. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 38: Using The Rcu

    7. Push the cursor key ↑ or ↓ to highlight the desired color. 8. Press ENTER to activate. 4.5 Using the RCU Pointing to the reflective screen 1. Point the front of the RCU to the reflective screen surface. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 39 When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line). The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote control unit and the projector IR sensor. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 40: Projector Address

    When the address is set, the projector can be controlled now: • RCU for addresses between 0 and 9. • computer, e.g. IBM PC (or compatible), Apple MAC, etc. for addresses between 0 and 255. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 41: Displaying And Programming Addresses

    Use the - button for lower contrast. Color Color saturation is only active for Video and S-Video. Adjust the color intensity of the picture. Use the + button for richer colors. Use the - button for lighter colors. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 42: The Pause Key

    The sound is not interrupted. The display on front of the projector will show a "P". To restart the image : • Press Pause key. • Press EXIT key • Select a source number. The Selection key See "Quick lens Adjustment", page 32 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 43: Random Access

    5. Random Access 5. RANDOM ACCESS Overview • Random Access Overview • Random Access Start up • File Service • Picture Tuning • Geometry • Geometry (WARP 6™ not activated) R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 44: Random Access Overview

    White Balance Black Balance Default Windowing Blanking Bottom Left Right Reset Shift Size Geo Soft Edge [On/Off] Aspect Ratio [5:4] [4:3] [16:9] 2. This function will be implemented in the next software release R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 45: Random Access Start Up

    1. Push the cursor key ↑ or ↓ to highlight Random Access. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-1 2. Press ENTER. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 46: File Service

    1. Push the cursor key ↑ or ↓ to highlight File Service. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-2 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 47: Load File

    (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing is found within this small area, the projector continues searching until it finds something). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 48: The Image Is Not Perfect

    The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. • Start up • Changing the settings • Correct value • Rename • Copy • Delete • File Options R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 49: Start Up

    1. Push the cursor key ↑ or ↓ to highlight an item. The color of the selected item will change. 2. Press ENTER to activate the digits. 3. Enter directly with the numeric keys on the RCU or local keypad the new value. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 50: Correct Value

    If not, adjust until full image height is displayed (no missing lines) Vertical Start number of lines between the start of the input signal and start of the image on the screen. AMDS INTL [ON/OFF] R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 51 The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity to [neg] or [pos]. Use the ENTER key to toggle between [pos] and [neg]. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 52: Rename

    Change that character by pushing the cursor keys ↑ or ↓. Numeric characters can be entered directly with numeric keys on the RCU. Press ENTER to confirm. The renamed file is entered in the list of files. 2. Press EXIT to return to the Rename menu selection. No changes are made. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 53: Copy

    Change that character by pushing the cursor keys ↑ or ↓. Numeric characters can be entered directly with numeric keys on the RCU. Press ENTER to confirm. The copy file is entered in the list of files. 2. Press EXIT to return to the Copy menu selection. No changes are made. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 54: Delete

    Start up 1. Push the cursor key ↑ or ↓ to highlight Options. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-21 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 55: File Sort

    This File Load setting is default set to [AUTOMATIC]. [AUTOMATIC] The projector will automatically load the file that is best suited for the selected Input Slot. [MANUAL] The user will select and load the desired file. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 56: Serial File Load

    1. Push the cursor key ↑ or ↓ to highlight Picture Tuning. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-26 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 57: Motion Compensation (Tmr) (Optional)

    1. Push the cursor key ↑ or ↓ to highlight Motion compensation. PICTURE TUNING MOTION COMPENSATION COLOR TEMPERATURE GAMMA INPUT BALANCE WINDOWING Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-28 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 58: Lcd Speed

    1. Push the cursor key ↑ or ↓ to highlight LCD speed R/G. MOTION COMPENSATION LCD SPEED LCD SPEED R/G LCD SPEED B/G Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-31 2. Press ENTER to select. A sliderbow will be displayed R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 59: Lcd Speed B/G

    The color temperature selection menu will be displayed. COLOR TEMPERATURE PROJECTOR WHITE COMPUTER 9300K VIDEO 6500K FILM 5400K BROADCAST 3200K CUSTOM BALANCE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-34 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 60: Gamma

    Start with the Black Balance. Continue with the White Balance. The default values are normally loaded with the factory preset when selecting a source. If the image is not as desired, continue with the next procedure. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 61 3. Use the cursor keys ← and ↓ to lower the Black Level of the Blue and Red color. 4. Use the Brightness + or – key to adjust the Black Level of the Green Color until there is ±50% noise visible. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 62 3. Use the cursor keys ← and ↓ to lower the Gain of the Blue and Red color. 4. Use the Contrast + or – key to adjust the Gain of the Green Color until there is ±50% noise visible. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 63: Windowing

    1. Push the cursor key ↑ or ↓ to highlight Windowing. PICTURE TUNING MOTION COMPENSATION COLOR TEMPERATURE GAMMA INPUT BALANCE WINDOWING Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-40 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 64: Blanking (Windowing)

    1. Push the cursor key ↑ or ↓ to highlight the desired side e.g. Top. BLANKING BOTTOM LEFT RIGHT RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-44 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 65 1. Push the cursor key ↑ or ↓ to highlight Reset. BLANKING BOTTOM LEFT RIGHT RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-45 2. Press ENTER to reset all blanking adjustments. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 66: Shift (Windowing)

    Horizontal Shift barscale 3. Push the cursor key ← or → to shift the image horizontally. Image 5-10 Horizontal Shift (Windowing) adjustment Push the cursor key ↑ or ↓ to shift the image vertically. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 67: Size (Windowing)

    2. Press ENTER to select. A barscale indication will be displayed. H SIZE Image 5-12 H Size barscale indication 3. Push the cursor key ← or → to adjust the horizontal size of the image. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 68: Geo Soft Edge

    BLANKING SHIFT SIZE GEO SOFT EDGE [ON] ASPECT RATIO [4:3] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-48 2. Press ENTER to toggle Geo Soft Edge [OFF] or [ON]. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 69: Aspect Ratio

    All menus within the Geometry adjustment mode are made semi-transparent to allow an easy interaction be- tween the numeric adjustment values and the result on the projected image. 3. When the WARP 6™ option is activated R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 70: Geometry File Annotation

    Edit : editing a geometry file, when leaving the EDIT menu a geometry user file is automatically saved. • Rename : renaming a geometry file. • Copy : copying a geometry file. • Delete : deleting a geometry file R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 71: Loading A Geometry File

    If no, When editing an existing set up push the ↑ or ↓ to highlight the corresponding user file . 2. Press ENTER to select. The selected geometry file will become the active file and the Geometry files menu will be displayed again. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 72: Guided Edit

    Level 9 quadrant Level 10 fine Level 11 H side Level 11 V side Level 12 center 17x17 Level 13 quadrant Level 14 fine Level 15 local Image 5-15 Overview hierarchic levels R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 73 • On top of this hierarchy is a matrix with 3 x 3 points, adjusting grid points on level 1 (corners) will affect level 2 till 15. Image 5-17 Level 1: 3x3 corner R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 74: Starting Up The Guided Edit Mode

    2. Press ENTER to select. The Guided Geometry Map menu will be displayed. GUIDED EDIT 17x17 SHIFT TRANSPORT DELAY BLANKING/SOFT EDGE RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-56 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 75: 3X3 Adjustment

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-59 2. By default corners is already selected, if not, press ENTER until corners is displayed. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 76: Adjusting The 3X3 Corners (Level 1)

    When AxisLink is set to On, the adjustment coordinate system will coincide with the edges of the distorted image. 4. This & indicates the position of the selected grid point within the 17 x 17 matrix. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 77 Start with a non distorted image, assume the left top corner is selected. Image 5-20 Non distorted image. Shift the left top corner +300 pixels to the left. 300,0 X: +300 Image 5-21 Shift the left top corner 300 pixels to the left. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 78: Axislink [On

    AxisLink The coordinate system used for the adjustment is absolute. [OFF] AxisLink [ON] AxisLink [OFF] 225,300 300,300 Image 5-22 Shift the left corner +300 pixels downwards R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 79 Menu 5-61 4. Push the cursor key ← or → to coarse shift the selected Corner in a vertical way (Follow this procedure in a similar way to adjust any desired corner position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 80: Selecting The 3X3 Side Bows (Level 2)

    What can be done? With the 3x3 Side Bow selection it is possible to: • apply a bow shaped pre-distortion on the projected image. • perform a coarse linearity adjustment off the projected image. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 81: Setting Up A Bow Shaped Pre-Distortion

    = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-63 2. Push the cursor key ← or → to coarse shift the selected Side Bow in a vertical way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 82: Linearity Adjustment Using 3X3 Side Bows

    1. Push the cursor key ↑ or ↓ to select pixel x = 0 in the Geometry Distortion menu. GEOMETRY DISTORTION side bows 3x3 col 8 row 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-64 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 83: Selecting The Center (Level 3)

    2. Press ENTER until center is displayed. GEOMETRY DISTORTION center 3x3 col = 8 row = 8 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-65 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 84: Adjusting The 3X3 Center (Level 3)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-66 2. Push the cursor key ← or → to coarse shift the Center in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 85 = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-67 4. Push the cursor key ← or → to coarse shift the Center in a vertical way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 86: 5X5 Adjustment

    5.5.7.4.1 Starting Up the 5x5 Adjustment (Level 4-6) What can be done? While the previous 3x3 adjustments are used to shape the basic geometry , the 5x5 adjustments will allow geometry adjustments at a medium level. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 87: Selecting The 5X5 H-Side (Level 4)

    2. By default H-side is already selected, if not, press ENTER until H-side is displayed. GEOMETRY DISTORTION H side 5x5 col = 4 row = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-70 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 88: 5X5 H-Side Adjustment (Level 4)

    = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-71 2. Push the cursor key ← or → to coarse shift the selected H side in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 89 4. Push the cursor key ← or → to coarse shift the selected H side in a vertical way (Follow this procedure in a similar way to adjust any desired H side position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 90: Selecting The 5X5 V-Side (Level 4)

    = 4 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-73 3. Push the cursor key ← or → to select the desired V-side. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 91: Adjusting The 5X5 V-Side (Level 4)

    = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-74 2. Push the cursor key ← or → to coarse shift the selected H side in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 92 4. Push the cursor key ← or → to coarse shift the selected H side in a vertical way (Follow this procedure in a similar way to adjust any desired H side position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 93: Selecting The 5X5 Center (Level 5)

    = 8 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink Menu 5-76 3. Push the cursor key ← or → to select the desired Center. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 94: Adjusting The 5X5 Center (Level 5)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink Menu 5-77 2. Push the cursor key ← or → to coarse shift the Center in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 95 = 0 y = 0 subpixels x = 0 y = 0 AxisLink Menu 5-78 4. Push the cursor key ← or → to coarse shift the Center in a vertical way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 96: Selecting The 5X5 Quadrant (Level 6)

    = 4 pixels x = 0 pixels y = 0 subpixels x = 0 subpixels y =0 AxisLink [ON] Menu 5-79 3. Push the cursor key ← or → to select the desired Quadrant. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 97: Adjusting The 5X5 Quadrant (Level 6)

    = 0 pixels y = 0 subpixels x = 0 subpixels y =0 AxisLink [ON] Menu 5-80 2. Push the cursor key ← or → to coarse shift the Quadrant in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 98 = 0 pixels y = 0 subpixels x = 0 subpixels y =0 AxisLink [ON] Menu 5-81 4. Push the cursor key ← or → to coarse shift the Quadrant in a vertical way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 99: 9X9 Adjustment

    Selecting the 9x9 Fine points (Level 10) • Adjusting the 9x9 Fine points (Level 10) 5.5.7.5.1 Starting up the 9x9 Adjustment (Level 7-10) What can be done? The 9x9 is used for the fine geometry adjustments. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 100: Selecting The 9X9 H-Side (Level 7)

    = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-84 3. Push the cursor key ← or → to select the desired H-side. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 101: Adjusting The 9X9 H-Side (Level 7)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-85 2. Push the cursor key ← or → to coarse shift the selected H-side in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 102 Menu 5-86 4. Push the cursor key ← or → to coarse shift the selected H-side in a vertical way (Follow this procedure in a similar way to adjust any desired H-side position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 103: Selecting The 9X9 V-Side (Level 7)

    = 2 pixels x = 0 y =0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-87 3. Push the cursor key ← or → to select the desired V-side. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 104: Adjusting The 9X9 V-Side (Level 7)

    = 0 y =0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-88 2. Push the cursor key ← or → to coarse shift the selected V-side in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 105 Menu 5-89 4. Push the cursor key ← or → to coarse shift the selected V-side in a vertical way (Follow this procedure in a similar way to adjust any desired V-side position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 106: Selecting The 9X9 Center (Level 8)

    = 8 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-90 3. Push the cursor key ← or → to select the desired Center. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 107: Adjusting The 9X9 Center (Level 8)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-91 2. Push the cursor key ← or → to coarse shift the selected Center in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 108 Menu 5-92 4. Push the cursor key ← or → to coarse shift the selected Center in a vertical way (Follow this procedure in a similar way to adjust any desired Center position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 109: Selecting The 9X9 Quadrant (Level 9)

    = 4 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-93 3. Push the cursor key ← or → to select the desired Center. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 110: Adjusting The 9X9 Quadrant (Level 9)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-94 2. Push the cursor key ← or → to coarse shift the selected Quadrant in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 111 Menu 5-95 4. Push the cursor key ← or → to coarse shift the selected Quadrant in a vertical way (Follow this procedure in a similar way to adjust any desired Quadrant position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 112: Selecting The 9X9 Fine Points (Level 10)

    = 2 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-96 3. Push the cursor key ← or → to select the desired Fine points. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 113: Adjusting The 9X9 Fine Points (Level 10)

    = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-97 2. Push the cursor key ← or → to coarse shift the selected Fine points in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 114 4. Push the cursor key ← or → to coarse shift the selected Fine points in a vertical way (Follow this procedure in a similar way to adjust any desired Fine points position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 115: 17X17 Adjustment

    Adjusting the 17x17 Local points (Level 15) 5.5.7.6.1 Starting up the 17x17 Adjustment (Level 11-15) What can be done? The 17x17 adjustments are used to fine tune the slightest detail of the geometry shape. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 116: Selecting The 17X17 H-Side (Level 11)

    = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-101 3. Push the cursor key ← or → to select the desired H-side. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 117: Adjusting The 17X17 H-Side (Level 11)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-102 2. Push the cursor key ← or → to coarse shift the selected H-side in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 118 Menu 5-103 4. Push the cursor key ← or → to coarse shift the selected H-side in a vertical way (Follow this procedure in a similar way to adjust any desired H-side position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 119: Selecting The 17X17 V-Side (Level 11)

    = 1 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-104 3. Push the cursor key ← or → to select the desired V-side. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 120: Adjusting The 17X17 V-Side (Level 11)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-105 2. Push the cursor key ← or → to coarse shift the selected V-side in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 121 Menu 5-106 4. Push the cursor key ← or → to coarse shift the selected V-side in a vertical way (Follow this procedure in a similar way to adjust any desired V-side position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 122: Selecting The 17X17 Center (Level 12)

    = 8 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLinks [ON] Menu 5-107 3. Push the cursor key ← or → to select the desired Center. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 123: Adjusting The 17X17 Center (Level 12)

    = 0 y = 0 subpixels x = 0 y = 0 AxisLinks [ON] Menu 5-108 2. Push the cursor key ← or → to coarse shift the selected Center in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 124 4. Push the cursor key ← or → to coarse shift the selected Center in a vertical way (Follow this procedure in a similar way to adjust any desired Center position). Image 5-67 17x17 Center (Level 12) adjustment R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 125: Selecting The 17X17 Quadrant (Level 13)

    Image 5-68 17x17 Quadrant (Level 13) selections The COL & ROW (Column and Rows) indicator will show the corresponding position of the selected Center and an indication box will be displayed on the screen. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 126: Adjusting The 17X17 Quadrant (Level 13)

    Menu 5-111 4. Push the cursor key ← or → to coarse shift the selected Quadrant in a vertical way (Follow this procedure in a similar way to adjust any desired Quadrant position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 127: Selecting The 17X17 Fine Points (Level 14)

    = 1 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-112 3. Push the cursor key ← or → to select the desired Fine points. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 128: Adjusting The 17X17 Fine Points (Level 14)

    = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-113 2. Push the cursor key ← or → to coarse shift the selected Fine points in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 129 4. Push the cursor key ← or → to coarse shift the selected Fine points in a vertical way (Follow this procedure in a similar way to adjust any desired Fine points position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 130: Selecting The 17X17 Local Points (Level 15)

    = 1 pixels x = 0 y = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-115 3. Push the cursor key ← or → to select the desired Local point. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 131: Adjusting The 17X17 Local Points (Level 15)

    = 0 subpixels x = 0 y = 0 AxisLink [ON] Menu 5-116 2. Push the cursor key ← or → to coarse shift the selected Fine points in a horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 132 4. Push the cursor key ← or → to coarse shift the selected Fine points in a vertical way (Follow this procedure in a similar way to adjust any desired Fine points position). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 133: Shift Adjustment

    Menu 5-118 2. Press ENTER to select. The Geometry Distortion menu will be displayed. GEOMETRY DISTORTION shift pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 5-119 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 134: Transport Delay

    The Bottom Transport Delay will apply a general delay on the received image data, this will allow the projector to gather all data from the Image Generator and perform all WARP calculations before projecting it on the screen. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 135 The Bottom Transport Delay will speed up the processing time, this extra time will allow the projector to load and process image data from the next image data received from the Image Generator. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 136 <ENTER> <EXIT> to return Menu 5-122 2. Press ENTER to select. The Transport Delay menu will be displayed. TRANSPORT DELAY TOP MODE [AUTOMATIC] TDR TOP BOTTOM MODE [AUTOMATIC] TDR BOTTOM 1200 Menu 5-123 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 137 TDR TOP BOTTOM MODE [AUTOMATIC] TDR BOTTOM 1200 Menu 5-125 4. Press ENTER to toggle from [AUTOMATIC] to [MANUAL]. TRANSPORT DELAY TOP MODE [MANUAL] TDR TOP BOTTOM MODE [AUTOMATIC] TDR BOTTOM 1200 Menu 5-126 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 138: Blanking

    1. Push the cursor key ↑ or ↓ to highlight Blanking/Soft Edge within the Guided Geometry map menu. GUIDED EDIT 17x17 SHIFT TRANSPORT DELAY BLANKING/SOFT EDGE RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-128 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 139: Blanking Active On

    1. Push the cursor key ↑ or ↓ to highlight Blanking in the Blanking/Soft Edge menu. BLANKING/SOFT EDGE ACTIVE [ON] BLANKING SOFT EDGE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-132 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 140: Blanking Shape Selections

    1. Push the cursor key ↑ or ↓ to highlight the first item in the Shape menu. SHAPE top left % of image = 0 %% of image = 0 Menu 5-134 2. Press ENTER to scroll through the available coarse shape selections: top, bottom, left and right. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 141: Blanking Adjustment

    2. Push the cursor key ← or → to black out the left top side of the image (Follow this procedure in a similar way to apply a desired blanking adjustment)image 5-79. 3. Use the %% of image adjustments to fine shift the selected grid point. 4. When finished press EXIT to return to the Blanking/Soft Edge menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 142: Electronic Soft Edge (Optional)

    When working in a multichannel setup the WARP 6™ and its extensive Soft Edge possibilities enable an image blending that gives the appearance of a single view, thus achieving realistic immersion for the majority of simulation and virtual reality applications. Image 5-80 WhySoft Edge ? R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 143: Preparations

    1. Push the cursor key ↑ or ↓ to highlight Blanking/Soft Edge menu. GUIDED EDIT 17x17 SHIFT TRANSPORT DELAY BLANKING/SOFT EDGE RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-136 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 144: Soft Edge Active On

    Before creating a soft edge, an overlap zone is created, the shape of this overlap zone is fully adjustable, within this menu the shape of the blending zone is aligned with the shape of the overlap zone. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 145: Soft Edge Shape Selections

    1. Push the cursor key ↑ or ↓ to highlight the first item in the Shape menu. SHAPE top left % of image = 0 %% of image = 0 Menu 5-142 2. Press ENTER to scroll through the available coarse shape selections: top, bottom, left and right. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 146: Basic Soft Edge Shape Set Up

    The following procedures will adjust the Shape of a basic Electronic Soft Edge set up with 2 projectors and a 12.5 % overlap zone, apply the same procedures for every Electronic Soft Edge you want to create in a multi-projector system. Image 5-83 Basic Electronic Soft Edge set up R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 147 3. Push the cursor key ← or → to coincide the right side of the image of Projector 1 with the center of the overlap area. Image 5-84 Basic Shape set up for Projector 1 4. Use the subpixel selections for fine adjustments. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 148: Soft Edge Width Start Up

    When Soft Edge is not installed on the projector or when the Soft Edge Active mode is set to [OFF] this menu item will be grayed out. What can be done with the Soft Edge Width menu ? Within this menu the width of the blending zone is set up. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 149: Soft Edge Width Selections

    5.5.7.10.9 Soft Edge Width selections How to use the Soft Edge Width selection ? 1. Press ENTER to scroll through all available Soft Edge Width selections: top, bottom, left and right. Image 5-87 Soft Edge Width selections R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 150: 10.10Basic Soft Edge Width Set Up

    1. Press ENTER until Left is selected. SOFT EDGE WIDTH LEFT Image 5-90 2. Push the cursor key ← or → to adjust the left width until it matches the right width of projector 1. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 151: Geometry Reset

    1. Push the cursor key ↑ or ↓ to highlight Reset in the Edit menu. GUIDED EDIT 17x17 SHIFT TRANSPORT DELAY BLANKING/SOFT EDGE RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-148 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 152: Restore All Levels

    1. Push the cursor key ↑ or ↓ to highlight Restore to 3x3 within the Geometry Reset menu. GEOMETRY RESET ALL LEVELS RESTORE TO 3x3 RESTORE TO 5x5 RESTORE TO 9x9 BLANKING/SOFT EDGE FULL RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-152 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 153: Restore To 5X5

    <ENTER> to confirm <EXIT> to return Menu 5-155 3. Press ENTER to reset the 5x5 adjustments Press EXIT to return to the Geometry Reset menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 154: Restore To 9X9

    SOFT EDGE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-159 3. Push the cursor key ↑ or ↓ to highlight Soft Edge or All in the Soft Edge Reset menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 155: Full Reset

    <ENTER> to confirm <EXIT> to return Menu 5-162 3. Press ENTER to reset all geometry and blanking/soft edge adjustments Press EXIT to return to the Geometry Reset menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 156: Free Edit

    Any desired gird point can be selected together with an interaction area, a selection box will indicate the selected grid point, a dotted line will indicated the interaction zone. Selection Box Interaction Box Image 5-92 Free Edit: Selection Box + Interaction Box R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 157 • Adjusting the position of the gird point will interact with all the points within the interaction box. • A gain factor will indicate the magnitude of 1 step in the geometry adjustment. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 158: Starting Up Free Edit Mode

    <ENTER> toggle between size and move area Select icons to adjust area, geometry or gain <ENTER> to continue <EXIT> to return Menu 5-164 3. Press ENTER to continue with the Free Edit adjustment. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 159: Free Edit Adjustment

    5.5.8.3 Free Edit Adjustment How to perform the Free Edit adjustment? 1. By default the Size/Move icon is highlighted, if not press the ADJ key on the RCU until the Size/Move incon is highlighted. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 160 Gain Mode Size Mode Image 5-96 By default the Size/Move icon is highlighted By default the Size/Move icon is set to ’Size’ mode. 2. Press ENTER to set the icon into ’Move’ mode. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 161 5. Random Access Move Mode Geometry Adjusment Mode Gain Mode Image 5-97 Set the icon into ’Move’ mode 3. Use the arrow keys to select the desired grid point. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 162 Use the arrow keys to select the desired grid point. 4. Press ENTER to set the icon back to ’Size’ mode. 5. Use the arrow keys to set the interaction zone to the desired size. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 163 Geometry Adjusment Mode Gain Mode Size Mode Image 5-99 Use the arrow keys to set the interaction zone to the desired size 6. Press the ADJ key on the RCU until the ’Gain’ is highlighted. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 164 This will shift the grid point in steps of 1/4 of a pixel This will shift the grid point in steps of 1/8 of a pixel This will shift the grid point in steps of 1/16 of a pixel R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 165: Renaming A Geometry File

    The Rename selection menu will be displayed. RENAME FILE Filename t_fishey.t06 t_globe.g02 t_keystn.g03 t_nodist.g01 t_sphear.g04 ------------------------------- Active file : t_nodist.g01 Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 5-166 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 166: Copy A Geometry File

    The Copy file menu will be displayed with the selected file name already filled in, leave in the ’From file name :’ area and in the ’To file name :’ area. The first character in the ’To file name :’ area is highlighted. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 167: Deleting A Geometry File

    Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 5-172 3. Push the cursor key ↑ or ↓ to select a file name. 4. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 168: Geometry (Warp 6™ Not Activated)

    Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-175 5.6.3 Size What can be done ? The size of the projected image can be adjusted in a vertical or horizontal way. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 169: Shift

    How to adjust Keystone? 1. Push the cursor key ↑ or ↓ to highlight Keystone. GEOMETRY SIZE SHIFT KEYSTONE BLANKING/SOFT EDGE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-178 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 170: Blanking - Soft Edge

    Menu 5-179 2. Press ENTER to select. For more information about the Blanking Adjustment: see "Blanking", page 134. For more information about the Soft Edge Adjustment: see "Electronic Soft Edge (Optional)", page 138. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 171: Installation Mode

    Build-up • Start up • Input Slots • No signal • Barco logo • Lens Adjustment • Menu Position • 800 Peripheral • Configuration • OSD Color • Internal Patterns • Shutter (Optional) R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 172: Installation Mode Overview

    The installation menu is build-up in two parts which are connected together with the ’more’ item. If the desired item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the installation menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 173: Start Up

    No signal: selection of a black or blue background color • Barco Logo: the Barco Logo can be added to the projected image, in overlay or on a background, on any place on the screen. • Lens: to perform lens adjustments •...

  • Page 174: No Signal

    When a 800 peripheral is connected to the projector, the input slots are not accessible with the cursor key to toggle their function. 6.5 No signal Overview • Changing the background color • Changing the shutdown setting • Changing the shutdown time R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 175: Changing The Background Color

    5 min Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-8 3. Push the cursor key ↑ or ↓ to highlight Shutdown. 4. Press ENTER to toggle between [ON] or [OFF]. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 176: Changing The Shutdown Time

    6.6 Barco logo What can be done? The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen. How to use the Barco Logo ? 1. Push the cursor key ↑ or ↓ to highlight BARCO logo.

  • Page 177: Available Settings

    OFF: no key on the RCU is used to display the BARCO logo. TEXT: the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational mode).

  • Page 178: Menu Position

    4. When finished, press EXIT to return to the installation menu or press ENTER to go to the zoom/focus function. 6.8 Menu Position What can be done ? The Menu position can be changed from bottom right to the center of the image. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 179: Peripheral

    2. Press ENTER to select. The 800 Peripheral menu will be displayed. 800 PERIPHERAL OUTPUT MODULE [STANDARD] CLO USING COMM800 [YES] INFRARED [PPM] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-18 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 180: Defining The Communication Protocol Of The Rcvds05

    3. Push the cursor key ↑ or ↓ to highlight infrared. 800 PERIPHERAL OUTPUT MODULE [STANDARD] CLO USING COMM800 [YES] INFRARED [PPM] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-22 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 181: Configuration

    1. Push the cursor key ↑ or ↓ to highlight OSD Color. INSTALLATION CONFIGURATION OSD COLOR INTERNAL PATTERNS SHUTTER ACTIVE 3D CONF. MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-24 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 182: Internal Patterns

    The internal patterns menu will be displayed. INTERNAL PATTERNS OUTLINE HATCH COLOR BARS MULTIBURST CHECKER BOARD PAGE CHAR ALPHANUMERIC CHARS CHARACTER SETS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-27 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 183: Shutter (Optional)

    Status will show the status of the night mode filter and the dimmer (Green = OK, Red = Error). 1. Push the cursor key ↑ or ↓ to highlight Night Mode Status. SHUTTER PRESENT [YES] NIGHT MODE STATUS <ENTER> to toggle <EXIT> to return Menu 6-30 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 184 6. Installation Mode The Night Mode Status menu will be displayed. NIGHT MODE STATUS # NIGHT MODE FILTER DIMMER PRESENT NIGHT MODE OPERATIVE <EXIT> to return Menu 6-31 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 185: Service Mode

    Lamp Runtime history • I2C Diagnoses • Dimming • Uniformity • Electronic convergence • DynaColor™ (Optional) • Gray Level Definition (Optional) • Purity • Display Blanking • Panel Adjustments • Preset Input Balance R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 186: Service Mode Overview

    The service menu is build-up in two parts which are connected together with the ’more’ item. If the desired item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 187: Start Up

    Title page: general information of the projector • SIM Options: shows which options are installed What can be seen on the title page screen? The title page screen shows the general information of the projector. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 188: Displaying The Identification Screen

    Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-4 2. Press ENTER to display the Identification screen. IDENTIFICATION TITLE PAGE SIM OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-5 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 189: Change Password

    How to enable or disable the password function ? This item is password protected when the password strap is installed. The password function is enabled when the password strap on the controller module is installed. Consult an authorized Barco service technician to change the strap position.

  • Page 190: Change The Address

    1. Enter the digits with the digit keys on the RCU or local keypad. push the cursor keys ← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 191: Common Address

    2. Press ENTER to display the Change Baudrate PC menu. CHANGE BAUDRATE PC 230400 115200 57600 38400 19200 9600 4800 1200 Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-16 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 192: Reset Lamp Runtime

    1. Push the cursor key ↑ or ↓ to highlight Lamp Run Time History. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE PROJ.ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY I2C DIAGNOSIS DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-19 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 193: I2C Diagnoses

    LCD DRIVER 50H ### LCD DRIVER 54H ### MOTOR DRIVER 74H ### SMPS DRIVER 78H ### LCD DRIVER COH ### LAMP DRIVER ECH ### Scroll with ↑ or ↓ <EXIT> to return Menu 7-23 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 194: Dimming

    5. Press ENTER to continue. A slider box is displayed. 6. Push the cursor key ← or → to select the 200W or 250W mode. DIMMING DIMMING 200W 250W Image 7-1 Image 7-2 200W mode 250W mode R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 195: Motorized Dimming (Optional)

    Within this menu it is possible to track and maintain the brightness level of each projector, the projector will deliver a Constant Light Output = CLO. How to set up a CLO system? CLO levels in Multichannel setups are controlled through RS232 by e.g. the xRACU™ Master Control Unit. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 196 CONSTANT LIGHT OUTPUT TRACKING INTERVAL [OFF] TARGET LIGHT VALUE 8000 _______________________ STATUS light value 931 tracking in range [YES] meas. in range [YES] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-31 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 197: Uniformity

    1. Press ENTER to display the Uniformity menu. UNIFORMITY ADJUST GRAY ADJUST BLACK ADJUST WHITE DEFAULT INITIALIZE WHITE INITIALIZE BLACK Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-34 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 198 A selection box and info box will be displayed. Selection Box Info Box Image 7-3 Selection and info box 5. Press ENTER to toggle between: Moving the selection box Adjusting the size of the selection box R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 199 ADJUST BLACK ADJUST WHITE DEFAULT INITIALIZE WHITE INITIALIZE BLACK Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-37 2. Press ENTER to set Uniformity back to the Default settings. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 200: Electronic Convergence

    UNIFORMITY ELECTRONIC CONVERGENCE DYNACOLOR GRAY LEVEL DEFINITION PURITY DISPLAY BLANKING PANEL ADJUSTMENT PRESET INPUT BALANCE MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-40 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 201: Dynacolor™ (Optional)

    How to Adjust DynaColor? 1. Push the cursor key ↑ or ↓ to highlight Adjust. DYNACOLOR ADJUST ACTIVE [OFF] DEFAULT INITIALIZE Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-43 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 202 Primary Color to add GREEN IN RED LEFT Image 7-10 Select a Primary Color to add 7. Use the BRIGHTNESS key to adjust the level of adding the second Primary Color (Range: 0 to 1000). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 203 Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-47 2. Press ENTER to reset the DynaColor settings to 0. 3. Press EXIT to return to the Service Mode menu. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 204: Gray Level Definition (Optional)

    1. Push the cursor key ↑ or ↓ to highlight Adjust. GRAY LEVEL DEFINITION ADJUST ACTIVE [OFF] INITIALIZE Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-50 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 205 1. Push the cursor key ↑ or ↓ to highlight Active [Off]. GRAY LEVEL DEFINITION ADJUST ACTIVE [OFF] INITIALIZE Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-52 2. Press ENTER to toggle Gray level Definition On/Off. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 206: Purity

    Min. Level: 0 Max. Level: 255 Gray Levels Red Levels Green Levels Blue Levels Image 7-13 The Purity menu 4. Press ENTER to adjust the level of the selected color (Range: 0 to 255). R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 207: Display Blanking

    Display Blanking is performed on Panel Level and so will pass the Geometry-Banking and/or Windowing-Blanking. Image 7-16 Display Blanking is performed on Panel Level Each side (Top, Bottom, Left, Right) of the image has 2 adjustable Display Blanking Locations. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 208 Image 7-18 Display Blanking Positions The Display Blanking Location represents an edge, all information beyond this edge will be blanked out, the following image shows a Display Blanking adjustment for the Top Location. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 209 1. Push the cursor key ↑ or ↓ to highlight Adjust. DISPLAY BLANKING ADJUST ACTIVE [ON] INITIALIZE Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-57 2. Press ENTER to select. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 210 1. Push the cursor key ↑ or ↓ to highlight Active [Off]. DISPLAY BLANKING ADJUST ACTIVE [ON] INITIALIZE Select with ↑ or ↓ <ENTER> to toggle/select <EXIT> to return Menu 7-61 2. Press ENTER to toggle Display Blanking On/Off. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 211: Panel Adjustments

    <ENTER> to accept <EXIT> to return Menu 7-64 Panel Adjustments is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the panel adjustments. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 212: Preset Input Balance

    <ENTER> to accept <EXIT> to return Menu 7-66 Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the Preset input balance adjustments. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 213: Standard Source Setup Files

    12. Ltot: total lines in one field 13. Lact: active lines in one field. 14. Fvert not in the range of 48–60 Hz 15. If ASC option is set 16. Only if video decoder is present R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 214 1920x562 25,000 35,556 37,092 2640 1920 hd_30i 1920x540 30,000 29,630 37,158 2200 1920 1280x1024 60,000 64,000 196,397 3088 1280 1060 1024 SXGA_60L 1280x1024 60,000 64,000 196,397 3088 1280 1060 1024 SXGA_60R Table 8-1 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 215: Source Numbers 81 - 86 And 91 - 96

    800 peripheral and 91 - 99 is shown in the diagram below. source input 1 source input 1 file A source input 91 file A’ source input 2 source input 2 file B source input 92 file B’ R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 216: Source Numbers 81 - 86

    2 source number 82 source number 83 source of slot 3 source of slot 4 source number 84 source of slot 5 source number 85 source of slot 6 source number 86 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 217: Cleaning The Dustfilter

    2. Turn out the 2 fixation screws of both dust filters. Image 10-1 Image 10-2 3. Clean the dust filter with a dry cloth. 4. Re-insert the dust filter. 5. Secure their position by insertion and tightening 2 fixation screws. R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 218 10. Cleaning the Dustfilter R5976707 REALITY SIM 6 ULTRA II 01/02/2005...

  • Page 219: Index

    Dimming Quadrant (Level 9) 105–106 Display Blanking Adjusting Dustfilter Selecting Cleaning Starting up (Level 7-10) DynaColor™ (Optional) V-side (Level 7) 99–100 Adjusting Selecting V-side (Level 8) Edit File Selecting Start up Electronic convergence R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 220 Gray Level Definition (Optional) Night Mode (Optional) I2C diagnoses Status Identification 183–184 No signal Displaying the identification screen No Signal 171–172 The different identification screens Background color Input 20, 22 Shutdown Setting Facilities Shutdown Time RCVDS05 R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 221 Random Access 39–41 Overview Start up 14, 29, 34 Uniformity Battery Terminology Overview Use of Video RCVDS05 175–176 Input (Optional) Communication Protocol Defining Output module Defining RS232 Windowing 59–60 Blanking Start Up Safety Warnings R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 222 Index R5976707 REALITY SIM 6 ULTRA II 01/02/2005...
  • Page 223 Revision Sheet Barco nv Simulation Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11, Fax: +32 56.36.84.86 E-mail: info@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation (R5976707/01): page wrong correct R5976707 R SIM 6 U II 01/02/2005...

Table of Contents