Common Address; Entering The New Common Address; Change Baudrate - Barco Reality SIM 6 Ultra II Owner's Manual

Continue with the other digits on the same way. The individual address must be between 0 and 255.
7.6.3

Common Address

How to change a Common Address?
1. Push the cursor key ↑ or ↓ to highlight the active Common Address e.g. (RC5).
CHANGE PROJ. ADDRESS
Projector address :
Common address (RC5) :
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-14
2. Press ENTER to select.

Entering the new common address

1. Enter with the digit keys on the RCU or the local keypad
Or,
pushing the cursor key ↑ or ↓ until the new value is reached.
Only addresses between 0 and 1 are valid.

7.7 Change Baudrate

Start up
1. Push the cursor key ↑ or ↓ to highlight Change Baudrate PC.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
I2C DIAGNOSIS
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-15
2. Press ENTER to display the Change Baudrate PC menu.
CHANGE BAUDRATE PC
230400
115200
57600
38400
19200
9600
4800
1200
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-16
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
1
0
7. Service Mode
187