Configuration; Osd Color - Barco Reality SIM 6 Ultra II Owner's Manual

4. Press ENTER to select.
5. Press ENTER to toggle between [PPM] or [RC5].

6.10 Configuration

What can be done ?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
Choosing the right configuration
1. Push the cursor key ↑ or ↓ to highlight Configuration.
INSTALLATION
CONFIGURATION

OSD COLOR

INTERNAL PATTERNS
SHUTTER
ACTIVE 3D CONF.
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-23
2. Press ENTER to select.
The configuration menu will be displayed.
6.11 OSD Color
What can be done?
The highlighted items on the menus can be displayed in red, green or yellow.
How to change the OSD Color ?
1. Push the cursor key ↑ or ↓ to highlight OSD Color.
INSTALLATION
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SHUTTER
ACTIVE 3D CONF.
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-24
2. Press ENTER to select.
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
6. Installation Mode
177