5. Random Access
Setting up the Shape for Projector 2
1. Use the combination of ENTER and the cursor key ← or → to select left all.
SHAPE
left all
% of image = 0
%% of image = 0
Menu 5-145
2. Push the cursor key ↑ or ↓ to select % of image.
SHAPE
left all
% of image = 0
%% of image = 0
Menu 5-146
3. Push the cursor key ← or → to coincide the left side of the image of Projector 2 with the center of the overlap area.
Image 5-85
Basic Shape set up for Projector 2
4. Use the subpixel selections for fine adjustments.
5.5.7.10.8 Soft Edge Width Start up
When Soft Edge is not installed on the projector or when the Soft Edge Active mode is set to [OFF] this menu
item will be grayed out.
What can be done with the Soft Edge Width menu ?
Within this menu the width of the blending zone is set up.
144
R5976707 REALITY SIM 6 ULTRA II 01/02/2005