Start Up; Input Slots - Barco Reality SIM 6 Ultra II Owner's Manual

6.3 Start up

How to start up the installation mode ?
1. Push the cursor key ↑ or ↓ to to select Installation.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-1
2. Press ENTER to start up the installation mode.
INSTALLATION

INPUT SLOTS

NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-2
Overview of the different settings of the Installation menu
• Input slots: to set up the input priority
• No signal: selection of a black or blue background color
• Barco Logo: the Barco Logo can be added to the projected image, in overlay or on a background, on any place on the screen.
• Lens: to perform lens adjustments
• Menu Position: to position the menu (picture settings: contrast,...) in the center or at the edge of the screen
• 800 -Peripheral: to select the type of output module and communication code used in the RCVDS 05
• Configuration: to select the configuration set up of the projector.
• OSD color: to change the color of the highlighted item
• Internal Patterns: selection of different patterns
• Shutter: to indicate whether or not a shutter is used
• Active 3D configuration: forces the projector to project the left or the right image of a 3D source
6.4 Input Slots
What can be done ?
The input configuration of the variable inputs is shown in the Input slots menu.
To view or change the input configuration.
1. Push the cursor key ↑ or ↓ to highlight Input Slots.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-3
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
6. Installation Mode
169