Uniformity - Barco Reality SIM 6 Ultra II Owner's Manual

6. Use the cursor keys ← or → to select the desired Tracking Interval, e.g. 16s, and press ENTER to activate.
Note: The Motorized Dimming menu item is greyed out when CLO is active.
CONSTANT LIGHT OUTPUT
TRACKING INTERVAL [16s]
TARGET LIGHT VALUE 8000
_______________________
STATUS
light value 931
tracking in range [YES]
meas. in range [YES]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-32

7.12 Uniformity

C
AUTION
Start up
1. Push the cursor key ↑ or ↓ to highlight Uniformity.
SERVICE
UNIFORMITY
ELECTRONIC CONVERGENCE
DYNACOLOR
GRAY LEVEL DEFINITION
PURITY
DISPLAY BLANKING
PANEL ADJUSTMENT
PRESET INPUT BALANCE
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-33
W
ARNING
the Uniformity Adjustment.
What is done?
The Uniformity Adjustment can be used to smooth out color differences in the blending zones in a multi channel setup.
The Uniformity Adjustment allows the user to select an area off the projected image, the user can define the position and size of this
area, a selection box will show the selected area.
Within the selected area it is possible to adjust the level of the Red, Green, Blue or all 3 colors (=White), this is possible for the Gray,
Black and White Level.
How to adjust the Uniformity?
1. Press ENTER to display the Uniformity menu.
UNIFORMITY
ADJUST GRAY
ADJUST BLACK
ADJUST WHITE
DEFAULT
INITIALIZE WHITE
INITIALIZE BLACK
Select with ↑ or ↓
<ENTER> to toggle/select
<EXIT> to return
Menu 7-34
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
:
Changing these settings may seriously affect the performance of the projector.
:
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel
7. Service Mode
193