Menu Position - Barco Reality SIM 6 Ultra II Owner's Manual

6. Installation Mode
Zoom/Focus adjustment of the lens
1. Push the cursor key ↑ or ↓ to highlight Lens.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-14
2. Press ENTER to select.
The adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
3. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
Note: The zoom/focus function is only applied when a motorized zoom lens is mounted.
4. When finished, press EXIT to return to the installation menu or press ENTER to go to the shift function.
Shift adjustment of the lens
1. Push the cursor key ↑ or ↓ to highlight Lens.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-15
2. Press ENTER to select.
The adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
3. Push the cursor key ↑ or ↓ to shift the image up and down and ← or → to shift the image left or right.
Note: The lens can be shifted in a range of :
vertical shift : - 2 mm to + 20 mm
horizontal shift : - 5 mm to + 5 mm
4. When finished, press EXIT to return to the installation menu or press ENTER to go to the zoom/focus function.

6.8 Menu Position

What can be done ?
The Menu position can be changed from bottom right to the center of the image.
174 R5976707 REALITY SIM 6 ULTRA II 01/02/2005