10.10Basic Soft Edge Width Set Up - Barco Reality SIM 6 Ultra II Owner's Manual

5. Random Access

5.5.7.10.10Basic Soft Edge Width Set up

Setting up the Width for Projector 1 ?
1. Press ENTER until Right is selected.
SOFT EDGE WIDTH RIGHT
Image 5-88
2. Push the cursor key ← or → to adjust the right width until it matches or exceeds the width of the overlap zone.
Image 5-89
Basic Width set up for Projector 1
3. Press EXIT to return to the Blanking/Soft Edge menu.
4. Press EXIT to return to the Guided Geometry Map menu.
5. Press EXIT to return to the Edit menu.
Setting up the Width for Projector 2 ?
1. Press ENTER until Left is selected.
SOFT EDGE WIDTH LEFT
Image 5-90
2. Push the cursor key ← or → to adjust the left width until it matches the right width of projector 1.
146
0.0
0.0
R5976707 REALITY SIM 6 ULTRA II 01/02/2005