Change Password; How To Enable Or Disable The Password Function; How To Change The Password - Barco Reality SIM 6 Ultra II Owner's Manual
Hide thumbs
Also See for Reality SIM 6 Ultra II:
- Brochure & specs (4 pages) ,
- Brochure (6 pages) ,
- Brochure (20 pages)
Table of Contents
Advertisement
3. Push the cursor key ↑ or ↓ to choose between Title page or Sim options.
4. Press ENTER to confirm.
BARCO
REALITY SIM 6 ULTRA II
Proj.
address:
001
Soft.
version:
2.00
Config:
FRONT/TABLE
Baudrate PC: 57600
text:
ON
Serial no:1010200
Run time:
100 h
<EXIT> to return
Menu 7-6
7.5 Change password
How to enable or disable the password function ?
This item is password protected when the password strap is installed.
The password function is enabled when the password strap on the controller module is installed. Consult an authorized Barco
service technician to change the strap position.
How to change the password ?
1. Push the cursor key ↑ or ↓ to highlight Change Password.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
I2C DIAGNOSIS
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-9
2. Press ENTER to display the Change Password menu.
CHANGE PASSWORD
Enter new password
_ _ _ _
Confirm new password
_ _ _ _
Select with ↑ or ↓
Reprogram with
numeric keys
then <ENTER>
<EXIT> to return
Menu 7-10
4 '_' characters are displayed. A new password can be entered with the digit keys of the RCU or local keypad. Every time a digit
is entered, a 'X' appears on the screen. The confirm new password is still grayed out.
3. Press ENTER, the confirm new password item becomes active. Press EXIT if no changes have to be made.
4. 4 'x' characters are displayed in the confirm new password area. Key in your password again with the digit keys of the RCU or
the local keypad.
5. Press ENTER to select.
If the confirm new password entry is the same as the entered new password, the password is changed.
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
BARCO
REALITY SIM 6 ULTRA II
Soft edge:
ON
TDR: ON
TMR: ON
Uniformity:
ON
Mot.
dimming:
OFF
Rugged:
OFF
Night Mode:
ON
<EXIT> to return
Menu 7-7
BARCO
REALITY SIM 6 ULTRA II
WARPING:
ON
GRAY LEVEL:
ON
DYNACOLOR:
ON
ACTIVE 3D:
OFF
FIELD STRETCH: OFF
VIDEO:
OFF
CLO:
OFF
<EXIT> to return
Menu 7-8
7. Service Mode
185
Advertisement
Table of Contents
