Defining The Communication Protocol Of The Rcvds05 - Barco Reality SIM 6 Ultra II Owner's Manual

6. Installation Mode
3. Push the cursor key ↑ or ↓ to highlight Output module.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
CLO USING COMM800 [YES]
INFRARED [PPM]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-19
4. Press ENTER to select.
5. Press ENTER to toggle between [STANDARD] or [5CABLE].
6.9.2

Defining the communication protocol of the RCVDS05

Which protocols are available ?
When a RCVDS05 is connected to the projector, the type of communication protocol used to communicate with the peripheral has
to be defined in the 800 peripheral menu.
• PPM
• RC5
Defining the communication protocol
To define the communication protocol:
1. Push the cursor key ↑ or ↓ to highlight 800 Peripheral.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-20
2. Press ENTER to select.
The 800 Peripheral menu will be displayed.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
CLO USING COMM800 [YES]
INFRARED [PPM]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-21
3. Push the cursor key ↑ or ↓ to highlight infrared.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
CLO USING COMM800 [YES]
INFRARED [PPM]
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-22
176 R5976707 REALITY SIM 6 ULTRA II 01/02/2005