Selecting The Center (Level 3) - Barco Reality SIM 6 Ultra II Owner's Manual

2. Push the cursor key ← or → to coarse shift the selected Side Bow in a horizontal way.
3. Repeat step 1 to 2 for the 3x3 side bow selection on the bottom.
This will shift the vertical center line, resulting in a coarse horizontal linearity adjustment (Follow this procedure in a similar way
to shift the horizontal center line).
Image 5-28
Using side bows to perform a coarse linearity adjustment
4. Use the subpixel adjustments to fine shift the selected Side Bows.
5. Continue with the 3x3 Center adjustment or press EXIT to return to the Guided Geometry Map menu.

5.5.7.3.7 Selecting the Center (Level 3)

What can be done ?
With the 3x3 Center selection it is possible to perform a coarse bow correction on the projected image.
How to select the 3x3 Center ?
1. Push the cursor key ↑ or ↓ to to highlight the 3x3 selection.
2. Press ENTER until center is displayed.
GEOMETRY DISTORTION
center 3x3
col = 8
row = 8
pixels x = 0
y = 0
subpixels x = 0
y = 0
AxisLink [ON]
Menu 5-65
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
5. Random Access
79