Transport Delay - Barco Reality SIM 6 Ultra II Owner's Manual

5. Random Access
How to use the Shift adjustment ?
1. Push the cursor key ↑ or ↓ to select Pixel x = 0 in the Geometry Distortion menu.
GEOMETRY DISTORTION
shift
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-120
2. Push the cursor key ← or → to shift the whole image in a horizontal way.
3. Push the cursor key ↑ or ↓ to Pixel y = 0 in the Geometry Distortion menu.
GEOMETRY DISTORTION
shift
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-121
4. Push the cursor key ← or → to shift the whole image in a vertical way.
5. Use the subpixel selections to fine shift the whole image.
6. Press EXIT to return to the Guided Geometry Map menu.

5.5.7.8 Transport Delay

What can be done with the Top and Bottom Transport Delay?
Assume we have an image with a side bow distortion on the bottom side, the projector already needs image information that is
halfway line 1200, before starting with this line.
The Bottom Transport Delay will apply a general delay on the received image data, this will allow the projector to gather all data from
the Image Generator and perform all WARP calculations before projecting it on the screen.
130 R5976707 REALITY SIM 6 ULTRA II 01/02/2005