3X3 Adjustment; Starting Up The 3X3 Adjustment (Level 1-3); Selecting The 3X3 Corners (Level 1) - Barco Reality SIM 6 Ultra II Owner's Manual

5.5.7.3 3x3 Adjustment

Overview
•

Starting up the 3x3 adjustment (Level 1-3)

•

Selecting the 3x3 Corners (Level 1)

• Adjusting the 3x3 Corners (Level 1)
• Selecting the 3x3 Side Bows (Level 2)
• Setting up a bow shaped pre-distortion
• Linearity adjustment using 3x3 Side Bows
• Selecting the Center (Level 3)
• Adjusting the 3x3 Center (Level 3)
5.5.7.3.1 Starting up the 3x3 adjustment (Level 1-3)
How to Start up the 3x3 adjustment (Level 1-3)?
1. Push the cursor key ↑ or ↓ to highlight 3x3 in the Guided Geometry Map menu.
GUIDED EDIT
3x3
5x5
9x9
17x17
SHIFT
TRANSPORT DELAY
BLANKING/SOFT EDGE
RESET
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-57
2. Press ENTER to select.
The Geometry Distortion menu will be displayed.
GEOMETRY DISTORTION
corners 3x3
col 0
row 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
AxisLink [ON]
Menu 5-58
5.5.7.3.2 Selecting the 3x3 Corners (Level 1)
What can be done?
With the 3x3 Corner selection it is possible to adjust the basic geometry and size of the projected image.
How to select the 3x3 Corners (Level 1)?
1. Push the cursor key ↑ or ↓ to highlight the 3x3 selection.
GEOMETRY DISTORTION
corners 3x3
col 0
row 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
AxisLink [ON]
Menu 5-59
2. By default corners is already selected, if not, press ENTER until corners is displayed.
R5976707 REALITY SIM 6 ULTRA II 01/02/2005
5. Random Access
71