Standard Mig/Mag Torch; Mig/Mag Special-Torches; Program- And Up- / Down Operation - EWM Phoenix 401 Progress puls MM FKW Operating Instructions Manual

5.8.14 Standard MIG/MAG torch

The MIG welding torch trigger is essentially used to start and stop the welding process.
Operating elements
Torch trigger
Other functions are also possible by tapping the torch trigger, depending on the machine type
and control configuration:
•
Change over between welding programs (see "Program changeover with standard torches (P8)"
chapter).
•
Program selection before starting welding (see chapter entitled "Selecting programs with the standard
torch trigger (P17)").
•
Change over between pulse and standard welding in the special latched operating mode.
•
Switching between wire feed units in dual operation mode (see chapter "single or double operation
setting (P10)")

5.8.15 MIG/MAG special-torches

Function specifications and more indepth information can be found in the operating manual for
the relevant welding torch!

5.8.15.1 Program- and Up- / down operation

Item Symbol
1
099-005323-EW501
21.05.2014
Functions
•
Start/stop welding
Description 0
Welding torch function changeover switch (special welding torch required)
Changing over programs or JOBs
Infinite adjustment of welding performance.
Design and function
Figure 5-38
MIG/MAG welding
73