EWM Phoenix 401 Progress puls MM FKW Operating Instructions Manual page 25

Item Symbol
7
8
9
10
11
12
13
14
099-005323-EW501
21.05.2014
Machine description – quick overview
Description 0
Select operating mode button
Non-latched
Latched
Signal light lights up in green: Special non-latched
Signal light lights up in red: MIG spot welding
Special latched
Push-button, welding type
standard MIG/MAG welding
pulsed MIG/MAG welding (not for Taurus S)
Push-button, throttling effect (arc dynamics)
Arc is harder and more narrow
Arc is softer and wider
Arc length correction/selection of welding program, rotary dial
•
Correction of the arc length from -9.9 V to +9.9 V.
•
Selection of welding programs 0 to 15 (not possible if accessory components, such
as program torches, are connected).
Button, Parameter selection (right)
VOLT Welding voltage
Prog Program number
kW Welding performance display
Gas flow quantity (optional)
Display, right
Welding voltage, program number, motor current (wire feed mechanism)
Gas test / rinse button
•
Gas test: For setting the shielding gas quantity
•
Rinse: For rinsing longer hose packages
See also "Shielding Gas Supply" chapter
Push-button, wire inching/motor current (wire feed mechanism)
Cf. chapter "Inching the wire electrode".
Machine control – Operating elements
25