Playing A Song - Korg Liverpool Owner's Manual

9 Finish the recording.
PRESS PLAY/STOP (SEQ1)
and the Recording status will be gone. Both Backing
Sequence tracks (RT and Ch/Acc) will be set to the
PLAY status.
10 Listen to the Song.
When back in the Backing Sequence Play page, press
PLAY/STOP (SEQ1) to listen to the new Song. How
smart were you?
If the Song is fine, you can switch to the Song mode
and do some editing. Or you can save it (as seen
below), and play it in Song Play mode.
11 Deleting one of the tracks, or the whole Song
and record again.
That's easy!
1. Press RECORD to enter Record mode.
2. Set the track to delete and set the REC status to
record.
3. Set the track you want to listen to during recording
to PLAY status. If you don't want to delete it, but
you don't want to listen to it, set the track to MUTE
status.
4. Start recording again. If you are recording the RT
track, you can't use the Style controls.
5. Press PLAY/STOP (SEQ1) to finish the Song and
exit Recording mode.
12 Time to save your Song.
If you don't save your Song, it will be lost when you
turn the instrument off, or switch to the Song Play
mode. You must save to a card any Song you wish to
preserve.
1. Insert your SD card into the card slot.
2. In the Backing Sequence Play page, select the "Save
Song" parameter.
3. Press the [F-1] button to select the SD card (SD).
4. Move the folder where you wish to save your Song
to the first line of the display, using the E–F (Scroll
Up) and G–H (Scroll Down) VOLUME/VALUE
buttons, or the TEMPO/VALUE controls. Press F-3
(OPEN) to open it. Close the current folder by
pressing F-4 (CLOSE).
5. To create a new file, move the "NEW_NAME.MID"
item to the first line of the display.
6. When the "NEW_NAME.MID" item is selected,
press one of the A VOLUME/VALUE buttons. You
are prompted to assign a name to the new folder:
Move the cursor using the DOWN/- and UP/+ but-
tons. Select a character using the DIAL. Insert a
character at the cursor position by pressing the
INSERT button. Delete a character at the cursor
position by pressing the DELETE button.
7. When you have finished writing a name for the
new midifile, press F-2 (SAVE) to confirm. The
"Are you sure?" message will appear. Press
ENTER to confirm, or EXIT to abort.
Need more information?
Go to "Backing Sequence operating mode" on page 82.
The Reference Guide includes all the information you
need.

PLAYING A SONG

1 If you want to select a song from internal mem-
ory (SSD), simply continue to the next step. If
you want to select a song from an SD card,
insert the SD card into the card slot.
2 Press the SONG PLAY button to access the
Song Play mode.
Tutorial 31
Playing a Song