Playing Back An Audio Song; Multi-Track Recording - Korg KROSS Operation Manual

button to select the AUDIO IN 1 row, and use KNOB 2 to
make adjustments.
5c
6. Hold down the EXIT button (
AUDIO REC (play/pause) button (
open the AUDIO RECORDER SETUP window.
7. Select the audio song that you want to record.
8. Press the MENU (Rec Control
the record-standby condition.
9. When you press the MENU (Rec Control
or the AUDIO REC
recording starts.
10.To stop recording, press the PAGE+ (Stop/Reset
button. When you stop recording, you automatically
return to the time location at which recording started.
Note: For details on the screen indications and operations
during recording, refer to "Recording the performance of the
KROSS"
Direct Send
Direct Send
Direct Send is a parameter that specifies whether the
external audio input sound is mixed with the performance of
the KROSS during recording. For example if you're
rehearsing in the studio, you could record only the band's
performance while you play the KROSS.
Direct Send off: The audio input and the KROSS's
performance are mixed and recorded.
Direct Send on: Only the audio input is recorded. The sound
of the KROSS's performance is not mixed. (In this case, the
audio input sound is not output from audio out.)
If you want to record only the external audio input sound,
turn Direct Send on in step 4 of "Recording an external audio
input."

Playing back an audio song

To play back an audio song, press the AUDIO REC
(play/pause) button. Whether you're in Program,
Combination, or Sequencer mode, you can play back
regardless of the mode you're in.
1. Select the audio song that you want to play back.
Hold down the EXIT button (
AUDIO REC (play/pause) button (
access the AUDIO RECORDER SETUP page.
Move the cursor to the audio song, and use the VALUE
dial etc. to select the song you want.
5d
) and press the
) to
) button to enter
) button
(play/pause) button,
)
) and press the
) to
Recording and playing audio Playing back an audio song
2. Press the PAGE+ (Stop/Reset
the beginning of the sound.
3. Press the AUDIO REC
play back the audio song (green LED lit).
4. Press the AUDIO REC
pause (green LED blinking).
5. Press the AUDIO REC
again to resume playback (green LED lit).
6. Press the PAGE+ (Stop/Reset
playback and return the location to the beginning
(AUDIO REC (play/pause) button LED unlit).
Moving the playback location
For details on how to move the playback location of an audio
song, please see "Locate" on page 100.

Multi-track recording

SD card usage during multi-track recording
When you perform multi-track recording, the audio recorder
stores additional data on the SD card in proportion to the
recording time (see page 99). If you intend to use the audio
recorder for multi-track recording, you should use an SD
card with plenty of capacity.
Multi-track recording procedure
To perform multi-track recording, select an audio song,
move the time location to the place where you want to start
(whether at the beginning or in the middle of the song),
switch sounds or audio input sources if necessary, and repeat
the steps described in "Recording the performance of the
KROSS" on page 101.
Tip: If you want to change the volume when you're
repeatedly recording the sound of the KROSS, you can use
the Hold function of Program mode or Combination mode to
adjust the balance. (see pages 32, 48)
In this example, we'll explain how to record a specific
region starting in the middle of the song.
1. Select the song on which you want to multi-track
record.
Hold down the EXIT button (
AUDIO REC (play/pause) button (
open the AUDIO RECORDER SETUP window. Use the
cursor buttons ◄►▲▼ to choose Audio Song, and use
the VALUE dial etc. to select a song.
2. Move to the location where you want to begin multi-
track recording.
For details on how to move, please see "Locate" on
page 100.
Tip: It's a good idea to move to a point where you can
start playback slightly earlier than you begin recording.
3. Press the AUDIO REC
start playback. (AUDIO REC
button: lit green)
4. Press the MENU (Rec Control
recording. (AUDIO REC
red)
) button to move to
(play/pause) button to
(play/pause) button to
(play/pause) button once
) button to stop
) and press the
) to
(play/pause) button to
(play/pause)
) button to start
(play/pause) button: lit
103