Playing The Opsix; Selecting A Program To Use When Playing - Korg Opsix Owner's Manual

2. Playing the opsix

Selecting a program to use when playing

1.
Turn the PROGRAM knob to select a program.
2.
Play the keyboard to check the sound.
Adjust the volume level using the VOLUME knob.
3.
To confirm that this is the program you want to select, press the YES button.
To cancel the selection and return to the previous program, press the NO button.
Press the PAGE < and > buttons shown in the program list to switch sounds one at a time.
Tip:
4.
To change the tonal range of the keyboard, press the OCTAVE button. You can change the octave
within a range of ±2 octaves.
5.
Use the PITCH wheel to change the pitch. The MOD wheel modifies whatever parameter is has
been assigned to. It is often used to change the cutoff frequency or vibrato depth. You can also
change which parameters are controlled by the MOD wheel.
Selected
program name
Octave ±0
Octave −1
Octave −2
19
Octave +2
Octave +1
Numbers in parentheses ( ) are MIDI note numbers.