Load Song Page; Save Song Page - Korg Liverpool Owner's Manual

84 Backing Sequence operating mode

Load Song page

Note: When in this page, the keyboard doesn't play.
Backing Sequence icon
Backing Sequence icon
When on, this icon indicates that the instrument is in
Backing Sequence mode.
Page header
This header shows the name of the selected Song.
B (Load Song)
Use these buttons to select a Song (i.e., a Standard
MIDI File). The Song Select page opens, and you can
select a Song (see below "Load Song page").
C (Save Song)
This command saves the recorded Song as a Standard
MIDI File. The file is automatically added the ".MID"
extension. After pressing this command, the Save Song
page appears (see "Save Song page" on page 84).
D (Select Tempo)
Select this parameter to use the TEMPO/VALUE sec-
tion to select the Tempo. When you select this parame-
ter, the VALUE LED turns off.
F (Metro)
Use these buttons to turn the metronome on/off during
playback.
G (Meter)
This non-editable parameter shows the starting meter
(or time signature) of the selected Song.
H (Tempo mode)
This sets the Tempo change mode.
Man(ual) When the cursor is on the "D (Select
Tempo)" parameter, you can change the
Tempo using the TEMPO/VALUE section
controls. The Song will be played back
using the manually selected tempo.
Auto The Tempo recorded into the Song will be
used instead.
Page header
LOAD SONG PAGE
This page appears when you press PAGE+ or either the
B (Load Song) buttons while you are in the main page.
Note: Songs on the internal SSD cannot be selected.
Press EXIT to go back to the main page of the Backing
Sequence operating mode, without selecting a Song.
A–C (File, folder)
Move the file or folder to be selected to the first line of
the display. To select a file, press the F-2 (SELECT) but-
ton. To open a folder, press the F-3 (OPEN) button.
The " " symbol identifies a folder.
E–F (Scroll Up)
Scroll the list up. Keep SHIFT pressed and press one of
these buttons to jump to the previous alphabetical sec-
tion.
G–H (Scroll Down)
Scroll the list down. Keep SHIFT pressed and press one
of these buttons to jump to the next alphabetical sec-
tion.
TEMPO/VALUE section
These controls scroll the list up or down.
F-1 (SD)
Press this button after replacing a card in the card slot.
The new card will be read, and the file list shown on the
display will be updated.
F-2 (LOAD)
Load the Song at the first line of the display.
F-3 (OPEN)
Opens the selected folder (file whose name begins with
the " " symbol).
F-4 (CLOSE)
Closes the current folder, returning to the parent
("upper") folder.

SAVE SONG PAGE

The recorded Song is contained in RAM, and is lost
when turning the instrument off. The Song is also lost
when you overwrite it in Record mode, or when
switching to the Song Play mode. You must save to a
card any Song you wish to preserve.