Table of Contents
Advertisement
Selecting and Playing Sounds
Selecting and Playing Sounds
Selecting Sounds
Selecting Performances from the display
1.
Press the
PERFORM
Wherever you are in the system, the second press will always bring up the home page, with the large Performance
name selected.
Performance Name
Layer Programs
2.
Follow the instructions under "Selecting from lists," below.
Selecting from lists
Note: These instructions also apply to selecting Set Lists, Performances, Programs, Effects Presets, Motion Sequences,
Wavetables, Multisamples, and Lane Presets.
1.
Cursor to the item that you'd like to select.
For this example, we'll use Performances, continuing from above.
2.
Turn the
VALUE
knob or press ENTER.
A popup appears, showing a list of sounds.
Data Type
Category or Collection
3.
Turn the
VALUE
knob or use
You can play the sounds as you scroll through the list.
4.
When you find a sound that you like, press
Using Categories
You can filter the list by category or collection. To do so:
1.
While the list is onscreen, press CATEGORY buttons 2 (BASS) to 16 (USER) to show only a specific category
of sounds.
2.
To show all sounds again, press button 1 (ALL).
The category names on the front panel apply to Performances, Programs, and Multisamples; for all other types of data
(Wavetables, Motion Sequences, etc.), the buttons select the first 15 Categories in the list.
button, and if necessary press it again.
Sort Order
<
and
>
to select sounds. Hold
ENTER
Page Indicators
Scroll Bar
ENTER
and press
again (or
SHIFT-ENTER
4
<
or
>
to jump by 5.
to cancel).
Advertisement
Table of Contents
