76
Song Play operating mode
Page 1 - Mixer: Volume
PAGE 1 - MIXER: VOLUME
Here you can adjust the volume for each of the 16
sequencer tracks. Press both VOLUME/VALUE button
to mute/unmute the corresponding track.
A muted track remains muted even when selecting a
different Song.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
PAGE 2 - MIXER: PAN
Here you can adjust the pan for each Song track.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
Pan
-64
Hard Left.
+00
Center.
+63
Hard Right.
Off
The direct (uneffected) signal does not go
to the outputs; only the FX signal is heard
for this track.
PAGE 3 - MIXER: FX SEND A/B
This page lets you set the level of the track's direct
(uneffected) signal going to the A and B Internal FX
processors (usually assigned to Sequencer 1).
Use the TRACK SELECT button to switch from tracks
1–8 to tracks 9–16.
Note: When playing back a Song that makes use of all four
effects (A–D), you can't edit any effect parameter. These
parameters appear greyed out in the display.