Event Edit Procedure - Korg Liverpool Owner's Manual

EVENT EDIT PROCEDURE

The Event Edit is the page where you can edit each sin-
gle MIDI event of the selected track. You can, for exam-
ple, replace a note with a different one, or change its
playing strength. Here is the general event editing pro-
cedure.
1. While in the Main page of the Song mode, load the
Song to edit (see "Main page" on page 89). If a
Song is already loaded or just recorded, this step is
not needed.
2. Press MENU, and use one of the H VOLUME/
VALUE buttons to select the Event Edit section.
The Event Edit page appears (see "Page 24 - Event
Edit" on page 103 for more information).
3. Press SEQ1 PLAY/STOP to listen to the Song. Press
SEQ1 PLAY/STOP again to stop it.
4. Press PAGE+ to go to the Event Filter page, and
turn "Off" the filter for the event types you wish to
see in the display (see "Page 25 - Event Filter" on
page 104 for more information).
5. Press PAGE- to go back to the Event Edit page.
6. Press the A VOLUME/VALUE button (Trk), to
select the track to edit. The Go To Track window
appears.
Use the TEMPO/VALUE controls to select a track,
and press ENTER to confirm (or EXIT to abort).
7. The list of events contained in the selected track
will appear in the display.
Song operating mode
For more information on the event types and their
values, see "Page 24 - Event Edit" below.
8. Use the B VOLUME/VALUE buttons to select the
Position line. Use these buttons or the TEMPO/
VALUE controls to change the event's position.
Measure
9. Use the C VOLUME/VALUE buttons to select the
Event line. You may use the C VOLUME/VALUE
buttons or the TEMPO/VALUE controls to change
the event type. Use the G VOLUME/VALUE but-
tons, and the F-3 and F-4 function keys to respec-
tively select the first and second value of the
parameter. Use the G VOLUME/VALUE buttons
or the TEMPO/VALUE controls to modify the
selected value.
Event Type
10. In the case of a Note event, use the D VOLUME/
VALUE buttons to select the Length line, and use
the same buttons, or the TEMPO/VALUE controls,
to change the event's length.
Measure
• After having modified the shown event, you
may scroll to the next event with the H VOLUME/
VALUE buttons (Scroll to next), or to the previous
event with the E/F VOLUME/VALUE buttons
(Scroll to previous).
• You may use the SHIFT + << or >> shortcut to go
to a different measure (see "SHIFT + << or >>" on
page 104)
• While the sequencer is running, you may use the
SHIFT + PAUSE shortcut to move the current
event in the display (see "SHIFT + PAUSE" on
page 104).
• As described in step 3, you may press SEQ1
PLAY/STOP to listen to the Song, and press SEQ1
PLAY/STOP again to stop the sequencer.
11. Use the INSERT button to insert an event at the
Position shown in the display (a Note event with
default values will be inserted). Use the DELETE
button to delete the event shown in the display.
12. When the editing is complete, you may select a dif-
ferent track (go to step 6).
13. When finished editing the whole Song, press EXIT
to go back to the Main page of the Song mode, and
select the Save Song command to save the Song the
card. See "Save Song page" on page 91 for more
information on saving a Song.
105
Event Edit procedure
Beat Tick
First value Second value
Beat Tick