Preferences - Korg Liverpool Owner's Manual

80 Song Play operating mode
Page 10 - Preferences
character at the cursor position by pressing the
INSERT button. Delete a character at the cursor
position by pressing the DELETE button.
4. When you have finished writing a name, press F-2
(SAVE) to confirm. The "Are you sure?" message
appears. Press ENTER to confirm, EXIT to abort.
F-2 (Add)
Adds a Song at the end of the current list. You can add
up to 127 Songs in a list.
Note: A Jukebox list can include only Songs contained in the
same folder.
F-3 (Ins)
Inserts a Song at the cursor position (i.e., the first line of
the display). All subsequent Songs are moved to the
next higher-numbered slot. You can add up to 127
Songs in a list.
Note: A Jukebox list can include only Songs contained in the
same folder.
F-4 (Del)
This command let's you delete the Song on the first line
of the display.
Pressed while keeping SHIFT pressed, the
whole Jukebox list is deleted. (The instrument asks for
a confirmation with the "Are you sure?" message; press
ENTER to confirm, EXIT to abort).
The Jukebox file name changes to "NEW_NAME.JBX".
PAGE 10 - PREFERENCES
In this page, you can set various general parameters.
Use the A–D VOLUME/VALUE button pairs to select a
parameter.
Note: These settings are stored in the Global file. After
changing these settings, press WRITE to save them into the
Global. The Write Global window will appear (see "The
Write window" on page 72).
Note: You can always start both sequencers simultaneously.
Start both sequencers simultaneously by keeping SHIFT held
down while pressing one of the PLAY/STOP controls.
Link Mode
The two onboard Sequencers can work each with a dif-
ferent Tempo (Off), or use the same Tempo (Link
modes).
Off The sequencers Tempo are not linked.
Each sequencer uses its own Tempo.
Link Measure
The two sequencers Tempo are linked
together. The Tempo data written into the
Songs are ignored. Adjust the Tempo
using the TEMPO/VALUE controls.
Start one of the sequencers, by pressing its
own PLAY/STOP control. Then, start the
other sequencer, by pressing the other
PLAY/STOP control; the second sequencer
starts at the next measure.
Link Beat The two sequencers Tempo are linked
together. The Tempo data written into the
Songs are ignored. Adjust the Tempo
using the TEMPO/VALUE controls.
Start one of the sequencers, by pressing its
own PLAY/STOP control. Then, start the
other sequencer, by pressing the other
PLAY/STOP control; the second sequencer
starts at the next beat (quarter or octave,
depending on the Song's Time Signature).
S2 FX Mode
This parameter selects the effects mode for Sequencer
2. When a 4-effects Song is loaded, all four effects are
used, independently from this setting.
AB The A and B effect pair is used. Sequencer
2 shares its effects with Sequencer 1.
CD The C and D effect pair is used.
Note: When this parameter is set to CD,
Sequencer 2 shares its effects with the Realtime
(Keyboard) tracks, so these effects can be changed
either selecting a Song for Sequencer 2, or select-
ing a Performance (unless the "Performance FX
Mode" parameter is set to Off – see below).
Performance FX Mode
This parameter selects the effects mode for the Perfor-
mance.
Off When selecting a Performance, no effect is
selected.
CD The Performance selects the C and D effect
pair.
Note: When both this parameter and the "S2
FX Mode" parameter are set to CD, Sequencer
2 shares its effects with the Realtime (Key-
board) tracks, so these effects can be changed
either selecting a Song for Sequencer 2, or
selecting a Performance.