How To Delete A Whole Song - Korg Liverpool Owner's Manual

88 Backing Sequence operating mode

How to delete a whole Song

<< or >> (Rewind or Fast Forward)
Use these buttons to move to the previous or following
measure. These commands are effective even if the
M(easure) parameter is not selected.
< or > (Previous or Next Step)
Use these button to go to the previous or next step (1/8,
or 192 ticks). If an event is located before the previous
or next step, the locator stops on that event. For exam-
ple, if you are positioned on M001.01.000, and no event
exists before M001.01.192, the > button moves to the
M001.01.192 location. If an event exists on M001.01.010,
the > button stops to the M001.01.010 location.
These commands are effective even if the M(easure)
parameter is not selected.
+ < or > (Previous or Next Event)
Keep the SHIFT button pressed while pressing the < or
> button, to move to the previous or next recorded
event.
HOW TO DELETE A WHOLE SONG
You can delete a whole Song with the simple SHIFT +
DELETE button sequence.
1. Enter the Backing Sequence mode. You must be in
the main page of the mode. If you are in Record
mode, go back to the Playback mode.
2. Press SHIFT + DELETE.
3. The "Delete Song?" message appears. Press
ENTER to confirm, EXIT to abort.