Saving A Song You Created - Korg KROSS Quick Start Manual

2.
Select and load a template
Use the From parameter to specify the template that you
want to load.
When you press the OK (MENU) button, the set of
sounds and effects will be loaded into the song.
Note: If you want to create a rhythm track as well, select
the Copy Pattern to MIDI Track too? option.
Creating a rhythm track
If you selected Copy Pattern to MIDI Track too? in
step 2, the following dialog box will appear after you load
the template.
3.
Select the drum pattern that you want to copy
Select a pattern and press the Copy (MENU) button; the
phrase of several measures will be copied from the
pattern to track 1. You can press the Copy (MENU)
button repeatedly to copy the phrase more times.
When you've finished copying the phrase, press the Exit
(FUNCTION) button.
Note: Since track 1 of the template is for drums, we
recommend that you copy the drum pattern phrase to
track 1.
Recording on tracks
1.
Specify the recording method
In the SEQ > REC page, use Recording Setup to specify
the type of realtime recording. By default, this will be
Overwrite. Overwrite will overwrite the performance
data as you record.
2.
Select the track that you want to record
In the SEQ > MAIN page, press the cursor button  to
select Track Select, and use the cursor buttons / to
select a track.
Measure Location
Track Select

3.
Press the REC ( ) button to enter record-standby
mode
4.
Start recording, perform, and then stop
Refer to step 2 of "Auto song setup" on page 16.
5.
Recording on other tracks
In the Track Select area, use the cursor buttons / to
select the track that you want to record (see step 2), and
proceed to record (see steps 3 and 4).
Note: If you want to change the location for recording or
playback, use the REW ( ) and FF (
playback, or use the Measure Location area. By default, the
Locate ( ) button will return to the beginning (001:01:000).
Creating a new song
You'll use the Create New Song function.
In the SEQ > MAIN page, choose the Create New Song
function (see "Pages and functions" on page 9); in the
settings dialog box use Set Length to specify the number of
measures, and then execute. (You can change the number of
measures later.)
Saving a song you
created
A song that you created can be saved on an SD card.
About the saved data
1.
Select the page
In GLOBAL/MEDIA mode, select the MEDIA > FILE
page. You can move directly to the MEDIA page by
holding down the EXIT button and pressing the
GLOBAL/MEDIA button.
2.
Selecting Save All function
Press the FUNCTION button. Use the (PAGE+) or
(PAGE-) button to select Save All, and then press the
OK (MENU) button.
3.
Name the file, and save it
Press the OK (MENU) button to save the data.
Note: To assign a name to the file that is saved, press the
ENTER button and enter a name in the text window that
appears.
Select and execute the Save SEQ function. All the other
steps are the same. Refer to the preceding "Saving the song
) buttons during
and sounds."

Saving a song you created

You can't save songs to internal memory.
When you turn off the power, the data in the KROSS
will disappear.
Use an SD card that you formatted with the KROSS.
Never remove the SD card while the display indicates
"Scanning Media" after you've inserted a card.
Song data is saved as an .SNG file. This contains the
performance data and the sound (program) numbers.
It does not contain the data for the sound
programs themselves. (SNG: SoNG)
Sound data is saved as a .PCG file. To ensure that
the correct sound will be used for playback, we
recommend that you save the .SNG file and .PCG
file together. (PCG: Program/Combination/Global)
Saving the song and sounds
Saving a song
17
En-