Advertisement
EA-1 EasyStart
Making connections
Connect EA-1 power supply
1.
or use headphones (phone jack) connect external source(CD player, synth, mic, etc.) to AUDIO IN jack power-up
monitor system and EA-1.
Part 1 key and Keyboard key will light on power-up
2.
VOLUME knob / monitor volume.
Playing the demo songs
Press SONG key. (Display indicates "S.01" – one of 7 demo songs)
1.
volume to suit
press STOP [
PLAY.
Pattern mode
Press PATTERN key
1.
Rotate DIAL to select any Pattern number (A.01 – d.26)
2.
playback
rotate DIAL to select and PLAY additional patterns.
!
Rotate DIAL as current pattern plays to select a new pattern - when the current pattern ends, the new pattern will begin.
(When you change patterns in this way, new pattern selected will playback at same tempo as previous pattern. To
playback new pattern at its original tempo, STOP pattern playback, then select and PLAY new pattern.
Working with Tempo:
Press PATTERN
1.
to use TAP tempo function: As pattern plays, strike TAP key 3x to set new tempo
Working with Parts:
Press PATTERN
1.
knobs and switches to edit the part. Note that Original Value LED lights when original knob/switch settings are recalled
press STOP to stop playback.
connect audio cables from PART1/MIX and PART2 outputs to powered monitor system,
] to stop playback
[]
press CURSOR
to set to "Pattern" (1
select any pattern
press PLAY
2 DSP analog modeled synth parts – trigger parts manually and edit with knobs and switches
rotate DIAL to select any pattern PLAY pattern press to select Part 1 or Part 2 key
strike any one of the 16 trigger keys repeatedly
press PLAY [> II] to playback demo song
to play additional demo songs, rotate DIAL to "S02" or "S03"
256 patterns in internal memory – all user-programmable
row, PATTERN column in matrix below display).
st
press PLAY. The pattern will loop
CURSOR
to Tempo (LED lights)
2
set MASTER
press STOP to stop
rotate DIAL to set tempo
press STOP to stop playback.
tweak the
adjust
Advertisement
