Edit: Delete - Korg Liverpool Owner's Manual

66 Style Record mode
Page 6 - Edit: Delete
the same buttons, or the TEMPO/VALUE controls,
to change the event's length.
Measure
• After having modified the shown event, you
may scroll to the next event with the H VOLUME/
VALUE buttons (Scroll to next), or to the previous
event with the E/F VOLUME/VALUE buttons
(Scroll to previous).
• You may use the SHIFT + << or >> shortcut to go
to a different measure (see "SHIFT + << or >>" on
page 64)
• As described in step 4, you may press START/
STOP and play some chords to listen how the pat-
tern sounds after your changes. Press START/
STOP again to stop the pattern running.
13. Use the INSERT button to insert an event at the
Position shown in the display (a Note event with
default values will be inserted). Use the DELETE
button to delete the event shown in the display.
14. When the editing is complete, you may select a dif-
ferent track (go to step 7), or a different Style Ele-
ment and Chord Variation (press EXIT to go back
to the Main page of the Style Record mode, then go
to step 2).
15. When finished editing the whole Style, press
WRITE to open the Write Style page.
• Use the A or E VOLUME/VALUE buttons to
enter the Text Editing mode. Use the UP and
DOWN buttons to move the cursor, and the dial to
select a character.
• Use the B VOLUME/VALUE buttons to select a
target location. The name of the Style already
existing at the selected location is shown after the
Style Bank-Location number.
Warning: If you select an existing Style and confirm
writing, the older Style is deleted and replaced by the
new one. Save the Styles you don't want to loose on a
card, before overwriting them.
16. Press ENTER to save the Style to the internal mem-
ory, or one of the D VOLUME/VALUE buttons
(Abort) to delete any changes made in Style
Record mode. When the "Are you sure?" message
appears, press ENTER to confirm, or EXIT to go
back to the Write Style page.
PAGE 6 - EDIT: DELETE
This page is where you can delete single elements or
MIDI events out of the Style.
Beat Tick
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
E/CV (Style Element/Chord Variation)
(Non editable) These read-only parameters show which
Style Element and Chord Variation are currently
selected for editing. See the Main page "E (Style Ele-
ment)" and "CV (Chord Variation)" parameters on
page 55 for information on selecting a different Style
Element and Chord Variation.
Trk (Track)
Use this parameter to select a track.
All
Drum...Acc5Selected track.
Ev (Event)
Type of MIDI event to delete.
All
Note
Dup.Note
A.Touch
P.Bend
PrChange
C.Change
CC00/32...CC127
All tracks selected. After deletion, the
selected Chord Variation will remain
empty.
All events. The measures are not removed
from the Chord Variation.
All notes in the selected range.
All duplicate notes. When two notes with
the same pitch are encountered on the
same tick, the one with the lowest velocity
is deleted.
After Touch events.
Note: This kind of data is automatically
removed during recording.
Pitch Bend events.
Program Change events, excluding the
bundled Control Change #00 (Bank Select
MSB) and #32 (Bank Select LSB).
Note: This kind of data is automatically
removed during recording.
All Control Change events, for example
Bank Select, Modulation, Damper, Soft
Pedal...
Single Control Change events. Double
Control Change numbers (like 00/32) are
MSB/LSB bundles.
Note: Some CC data are automatically
removed during recording. See the table on
page 54 for more information on the allowed
data.