Standard Interfaces - Pin Assignments; 101) Power Input Connector; 110) Serial Interface Rs232 - Kontron KBox C-101 User Manual

18. Standard Interfaces – Pin Assignments
18. Standard Interfaces – Pin Assignments
Low-active signals are indicated by a minus sign.
18.1.1. (X 101) Power Input Connector
Pin Signal Name
1 +24 VDC (input)
2 Ground
3 0V (input)
18.1.2. (X 110) Serial Interface RS232
Pin Signal Name
1 DCD (Data Carrier Detect)
2 RXD (Receive Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Signal Ground)
6 DSR (Data Set Ready)
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 RI (Ring Indicator)
www.kontron.com
KBox C-101 – User's Guide (Version 2.00)
3-pin POWER SUBCON (male)
9-pin D-SUB Connector
63