11/ Standard Interfaces - Pin Assignments; Dc Jack; Ethernet Connectors; Usb 3.0 Port - Kontron KBox E-200 Series User Manual

11/ Standard Interfaces – Pin Assignments
Low-active signals are indicated by a minus sign.

11.1.1. DC Jack

Table 5: DC Jack (see Figure 2, pos.1)

Pin Signal Name
1
+19Vin
2 GND

11.1.2. Ethernet Connectors

Table 6: Ethernet Connector (see Figure 2, pos. 3)

Pin Signal Name
1 TX1+
2 TX1-
3 TX2+
4 TX3+
5 TX3-
6 TX2-
7 TX4+
8 TX4-

11.1.3. USB 3.0 Port

Table 7: USB 3.0 Port (see Figure 1, pos. 9 & Figure 2, pos.4)
USB 2.0 Contact Pins
Pin Signal Name
1 +USBVCC
2 USB_D-
3 USB_D+
4 GND
www.kontron.com
USB 3.0 Contact Pins
Pin Signal Name
5 USB_RX-
6 USB_RX+
7 GND
8 USB_TX-
9 USB_TX+
DC Jack (female)
LAN1, LAN2 (RJ45)
9-pin USB Connector Type A Version 3.0 / 2.0
KBox E-200 Series - User Guide, Rev. 1.0
8 7 6 5 4 3 2 1
// 43