Power Off/On Procedure - Kontron KBox C-101 User Manual

12. Starting Up KBox C-101 – User's Guide (Version 2.00)

12.2. Power OFF/ON Procedure

As the KBox C-101 is equipped with an internal hold-up buffer, it can't be switch off/on immediately.
The buffer time depends on the power consumption and load on the KBox C-101 processor and peripherals. Therefore the
following procedure must be observed.
1. Remove power from the system.
2. Wait until the green power-LED (Fig. 15, pos. 2) stops blinking.
3. Wait at least 3 seconds.
4. Reapply power.
42 www.kontron.com