Table of Contents
Advertisement
For applications or equipment with serial connectors, use the Christie-proprietary serial protocol to
communicate with the RS422 port or the RS232 ports on the MCPU faceplate.
The RS232 port located on the MCPU faceplate uses Christie-proprietary protocol and is
intended for Christie accessories or automation controllers only. Failure to comply may result
in equipment damage.
Ethernet Setup
Ethernet is setup to obtain an IP address automatically if a DHCP server is on the network. To
modify IP settings, or manually enter an address:
1. Tap Menu Tab > Configuration > Ethernet Settings > Modify IP Settings.
2. Set the network information for the projector:
•
To obtain information automatically from the network, tap Automatic.
•
To manually enter the network information, tap Manual and enter the IP Address,
Subnet Mask and Gateway (optional).
3. Click Ok.
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
Add Devices
33
Advertisement
Table of Contents
