Table of Contents
Advertisement
View 3D Content
This section provides information and procedures for setting up and managing 3D presentations.
Set up Mirage 4KLH projectors for 3D
The Mirage projector is capable of displaying stereoscopic 3D video sources, relying on additional
hardware (stereo emitters and glasses) to complete the display system.
Images generated from a stereo 3D video source consist of a series of images (frames) that
alternate quickly between two slightly different viewpoints, corresponding to our left and right eyes.
When these frames are displayed fast enough and viewed with special glasses synchronized to the
left/right (L/R) changes, the resulting image appears with the same depth and perspective sense in
the real world.
The type of 3D glasses can be active or passive stereo depending on the type of stereo
controllers and screen used.
3D requirements
Stereo 3D applications require a stereo 3D-capable source, special hardware and software setups,
and the projector's 3D Settings menu option to control the projector's processing, synchronization,
and displaying of the stereoscopic 3D source material.
Hardware requirements
Note the following hardware requirements for stereo 3D applications:
•
Christie Digital Systems Mirage 4KLH Series projector
•
3D stereo sync cable (for Direct-Input 3D)
•
A source, usually a computer with a 3D graphics card(s)
•
Emitter for controlling active shutter glasses
or
A qualified device that mounts in front of the lens of the project to process the light from the
lens into a passive polarized light. Contact your Immersive dealer for more information.
Software and content requirements
Note the following software and content requirements for stereo 3D applications:
•
Any 3D computer software application that supports 3D stereo on a supported computer(s) with
associated graphic cards (suggested cards include AMD or NVIDIA)
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
34
Advertisement
Table of Contents
