Table of Contents
Advertisement
AC/power precautions
Failure to comply with the following could result in death or serious injury.
• Use only the AC power cord provided with the projector. Do not attempt operation if the
• As a safety feature the projector is equipped with a three-wire plug with a third
• Loose cables provide a trip or fire hazard. Position all cables where they cannot contact
• Damaged cables provide a fire hazard. Do not allow anything to rest on the power cord.
• Overloaded power outlets and extension cords provide a fire and shock hazard. Do not
• Disconnect projector from AC before opening any enclosure.
Only qualified service technicians are permitted to open projector enclosures and only if the
projector is disconnected from AC power. Failure to comply could result in minor or moderate
injury.
Christie Laser Projection System components
A
B
Fiber optic bundle
A
Transmits the collected laser light to the projector.
Projector
B
Modulates light from the laser modules and passes it through a projection lens to produce the image on
the screen.
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
AC supply is not within the specified voltage and power range, as specified on the license
label.
(grounding) pin. If you cannot insert the plug into the outlet, contact an electrician to
have the outlet replaced. Do not defeat the safety purpose of the grounding-type plug.
hot surfaces, be pulled, or be tripped over.
Never operate the projector if a cable appears damaged.
overload power outlets or extension cords.
E
LASER INTERLOCK
LASER RACK
D
C
F
INTERLOCK IN
Introduction
G
H
I
J
8
Advertisement
Table of Contents
